gspears
Member
I have to pull the heads on my 04 3.0 and do a valve job. So I figure I have to get head gasket set, head bolts, and the timing cover is also leaking a little bit so I’ll change that gasket also and then do the cam sensor shaft or whatever that is.
So what I’m looking for is recommendations on brands and places to get them at a reasonable cost. I’m in Phoenix and have an AutoZone close but funds are real tight so If getting them online is going to save significantly I need to do that. Felpro used to make good gaskets and I’m assuming they still do. I figure I’ll also change the plugs, wires, and the water pump while I’m in there.
So suggestions? Anything else I should change while I’m in there? I noticed Rock auto sponsor’s parts of this forum. How are their prices?
Thanks in advance for your help.
So what I’m looking for is recommendations on brands and places to get them at a reasonable cost. I’m in Phoenix and have an AutoZone close but funds are real tight so If getting them online is going to save significantly I need to do that. Felpro used to make good gaskets and I’m assuming they still do. I figure I’ll also change the plugs, wires, and the water pump while I’m in there.
So suggestions? Anything else I should change while I’m in there? I noticed Rock auto sponsor’s parts of this forum. How are their prices?
Thanks in advance for your help.