I was having issues with the temperature readings in the temperature gauge on my 4.0 OHV 4x4 '99, so I went to the shop for a diagnostic, the mechanic took off the sender, but he made it with the wrong tool, he broke the plastic head of the sender and the letters and numbers that identify the part are now unreadable. I think it is a special part because one pin is larger than the other, in fact the other pin doesn´t have any function I gues, see the attached picture of the sender. Does anybody now what is this part the numbers and letters to identify it? is it a sender or a sensor?. See the attached pictures, the location of the part is indicated with the edge of a green arrow. Thanks for your help.
-
Welcome Visitor! Please take a few seconds and Register
for our forum. Even if you don't want to post, you can still 'Like' and react to posts.
Help with temperature gauge problem and the right sender part
- Thread starter Joe1970
- Start date
- Joined
- Oct 24, 2012
- Messages
- 4,600
- Age
- 35
- City
- Lafayette
- State - Country
- TN - USA
- Vehicle Year
- 1988
- Vehicle
- Ford Ranger
- Drive
- 4WD
- Engine
- 4.0 V6
- Transmission
- Manual
- Tire Size
- 245-70-R16
That connector looks melted...
STANDARD MOTOR PRODUCTS TS376
MOTORCRAFT DY1144
STANDARD MOTOR PRODUCTS TS376
MOTORCRAFT DY1144
Similar threads
Sponsored Ad
Sponsored Ad
TRS Events
Member & Vendor Upgrades
For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.
Recently Featured
Ranger Adventure Video
TRS Merchandise
Follow TRS On Instagram
