• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

emissions control system


R anger

Member
Joined
Oct 15, 2010
Messages
14
City
Vancouver B.C. Canada
Vehicle Year
1992
Transmission
Automatic
(KOEO,KOER)I'm not reading a 5 volt reference at my tps sensor and others. (act, ect)The eec relay and fuse are good. There was an electrical fire near the alternator from a previous owner. Maybe the eec is fried?

I also took out the a/c no need for it in vancouver, should I unplug the wot relay or leave it in?

Any help will be greatly appreciated. I really want to get out an drive. It won't pass Air Care.

.......1992 2.9 auto 4x4
 
Does any body know what the clutch triple function switch is and how would I diagnose it?
What I found was the red/light blue wire from the starter relay got hot, melted the plastic casing. This wire goes to this switch, and on to my map sensor throttle position sensor engine coolant sensor and intake temp sensor. These sensors are not getting power(5 volts)
I ordered an ecm off ebay should be here next week but I want to understand what the triple function switch does and why its tied into these sensors? Can I replace it?
 

Sponsored Ad


Sponsored Ad

TRS Events

Member & Vendor Upgrades

For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.

Recently Featured

Want to see your truck here? Share your photos and details in the forum.

Ranger Adventure Video

TRS Merchandise

Follow TRS On Instagram

TRS Sponsors


Sponsored Ad


Sponsored Ad


Amazon Deals

Sponsored Ad

Back
Top