d28 to d35 swap

[joe joe]

will my warn hubs on my d28 work on my d35 ? will my d35 handle a 5.13 with 36 swampers?

 

[Sasquatch_Ryda]

No the hubs won't fit.

Yes, 5.13's and 36's will work. I've been running 4.56's and 36's for 3 years now. Upgrade to Spicer 5-760x u joints, and do the axle shaft mod to run full circlips on the U joint caps. I would also recommend tack welding the U joint caps to the axle ears. I've been stretching the ears and egging the holes out because the U joints start to spin. I'm also running a front locker tho, didn't have problems with that before the locker.

 

[joe joe]

thanks im new to the 4wd world little fuzzy on this stuff can the warn hubs be switched over

 

[Sasquatch_Ryda]

The Dana 28 hubs will not fit the Dana 35. You will need to get new warn hubs unless your axle you get to swap in already has them.

 

[4x4junkie]

See here about the right hubs for your D35 swap:

http://www.therangerstation.com/Magazine/May04/offroad.htm

 

[pillen140]

I have a d35 and 35's, spun a ujoint cap once, tacked them like sasquatch mentioned, and havent had a problem since. Also, he is right about the hubs not fitting.