Custom made or upgraded steering column!!!

[sexybluelady]

Hi folks, I made a post about this many years ago but didn't get many replies. At the time I was looking for anyone that knew if the bearings in the steering column where available anywhere or ways that a person could make their steering column tight. Or suggestions on any suppliers that sell an aftermarket/upgraded steering column.

I have done and replaced everything to to my steering system (besides the column) to help get rid of my sloppy steering column that now binds once in a while, while driving. I am now desperate to find a replacement or anyone else that has just made their own. Offer me a quick guide on making my own as well.

I have a 1st gen, 1988 Ranger with a tilt column but I could care less if a replacement doesn't have tilt, I never use it anyways.

 

[Blmpkn]

Jegs/summit/speedway all have a variety of attractive universal columns from 115-300$

 

[sexybluelady]

Jegs/summit/speedway all have a variety of attractive universal columns from 115-300$

Thank you, do you happen to know which ones would work though? I have surfed through jegs and summit and the catalog for aftermarket steering columns is a mile long. I do not even know where to start or which one would fit.

 

[Eddo Rogue]

My buddies that do custom stuff usually just order it all off amazon or whatnot...but I dont have such luck with matching up compatible stuff...for me, even the plug and play kits wont all fit.

 

[sexybluelady]

My buddies that do custom stuff usually just order it all off amazon or whatnot...but I dont have such luck with matching up compatible stuff...for me, even the plug and play kits wont all fit.

Thanks, I've looked through amazon andd haven't found much either. I'm still stuck in the same spot as before. Where I get a lot of vague information but nothing solid to go off of. Not even a part number or a couple of universal ones that may work with some fabin' and welding, etc.

 

[Blmpkn]

Thank you, do you happen to know which ones would work though? I have surfed through jegs and summit and the catalog for aftermarket steering columns is a mile long. I do not even know where to start or which one would fit.

I'm not entirely sure no.. never had to mess with replacing a column before. I'd like to think that as long as your somewhat handy with light wiring and fab any of them would probably work though.

I don't remember exactly but I believe that @91bodiedranger might have put an aftermarket column in his truck? I guess I don't have his screen name correct though..

 

[Sharky]

look this over....a great company, I have 1 of their columns in my coupe.


https://www.ididit.com/p-36988-universal-series.html

 

[Curious Hound]

I'm not entirely sure no.. never had to mess with replacing a column before. I'd like to think that as long as your somewhat handy with light wiring and fab any of them would probably work though.

I don't remember exactly but I believe that @91bodiedranger might have put an aftermarket column in his truck? I guess I don't have his screen name correct though..

I don’t remember if he used an aftermarket column or if it’s the original bel-aire column to match the dash. Have to go read his thread again.

 

[sexybluelady]

I don’t remember if he used an aftermarket column or if it’s the original bel-aire column to match the dash. Have to go read his thread again.

please let me know if you happen to find that thread. I looked around and couldn't find it.

 

[bobbywalter]

please let me know if you happen to find that thread. I looked around and couldn't find it.

i remember you.

mcmaster carr has the bearings..i dont have the number handy....i was looking for the ones i ordered...i was just today looking at this as i am getting ready to start patching in the a pillars on my 88....it needs that bearing again.

 

[bobbywalter]

Bearing Lower Steering Column - 1978-91 Ford Trucks, 1980-91 Broncos, 1967-82 Ford Cars

Bearing Lower Steering Column 1978-91 Ford Trucks 1980-91 Ford Broncos 1967-82 Ford Cars 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 Thunderbird Galaxie F100 F250 F350 F150 C

www.dennis-carpenter.com

similar to this

this style should work

E5TZ3517A Ford Ranger Aerostar Bearing LOWEST on EBAY Guaranteed for sale online | eBay

Find many great new & used options and get the best deals for E5TZ3517A Ford Ranger Aerostar Bearing LOWEST on EBAY Guaranteed at the best online prices at eBay! Free shipping for many products!

www.ebay.com

E5TZ3517A - Ford Bearings. (Lower). TILT, WHEEL, STEERING | Lakeland Ford Online Parts, Lakeland FL

Genuine Ford Part # E5TZ3517A (E5TZ-3517-A) - Bearings. (Lower). TILT, WHEEL, STEERING. Fits Aerostar, Bronco II, Ranger. Ships from Lakeland Ford Online Parts, Lakeland FL

parts.lakelandford.com

might need this style retainer depending on what you have.

 

[bobbywalter]

McMaster-Carr

McMaster-Carr is the complete source for your plant with over 595,000 products. 98% of products ordered ship from stock and deliver same or next day.

www.mcmaster.com

 

[Curious Hound]

please let me know if you happen to find that thread. I looked around and couldn't find it.

Here’s the thread from the beginning. This truck will be in our 2024 calendar.

91 Ranger bodied 5.3 ls swap

I know I'm gonna catch hell from you ford guys but here is a truck I've been working on. 4 inch traditional body drop, 5.3 lm7 swap 4l60e auto trans, 55 chevy bel air dash swap. custom built recessed firewall and trans tunnel. lots of work left but wanted to post.will post more pics once I get...

www.therangerstation.com

 

[sexybluelady]

Thank you so much guys!! This is a awesome start. I've been trying so hard to find the proper bearings and bushings, etc. This is the information that I needed. If anyone else knows of any other parts that I may need to rebuild the steering column please feel free to post up. This will also make it easier for anyone else looking for this information for their worn out steering column.
I'm going to pick up all of the parts that were listed here today. So I can pull the column and hopefully have it rebuilt by next week.

 

[tinman_72]

I can't believe no one suggested car-part.com . I searched for a column in my area and found a whole list.