Andylogger42
New Member
Hey I’m about to replace my camshaft on my 4X4 3.0 99 ranger and I have to ask can what all do I have to remove to replace the camshaft?
-
Welcome Visitor! Please take a few seconds and Register
for our forum. Even if you don't want to post, you can still 'Like' and react to posts.
Camshaft install
- Thread starter Andylogger42
- Start date
still in the vehicle? or on a stand?
will you be replacing the cam bearings too?
basically, it's easier to state what does not have to come off.
when you get down to the head bolts ,, stop. don't touch the exhaust manifolds either.
upper & lower intake comes off, valve covers, rockers loosened enough to remove pushrods, lifters, front engine cover, timing chain,
cam synchronizer.
the EGR tube between the driver exhaust manifold and intake can be a genuine pain-in-the-rusted-rear type of issue.
will you be replacing the cam bearings too?
basically, it's easier to state what does not have to come off.
when you get down to the head bolts ,, stop. don't touch the exhaust manifolds either.
upper & lower intake comes off, valve covers, rockers loosened enough to remove pushrods, lifters, front engine cover, timing chain,
cam synchronizer.
the EGR tube between the driver exhaust manifold and intake can be a genuine pain-in-the-rusted-rear type of issue.
Similar threads
2.3L ('83-'97)
Ranger 1992 2.3l Camshaft sensor install please help!!
Sponsored Ad
Sponsored Ad
TRS Events
Member & Vendor Upgrades
For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.
Recently Featured
Ranger Adventure Video
TRS Merchandise
Follow TRS On Instagram
