BW 1350 manual No four low.

[tenga]

As the title says, wont engage into 4-low, if i put it into gear it still acts as if it was in neutral; this happens with any gear I put it into. 4-Hi is working fine though. What exactly could be causing this?

 

[Snoranger]

Your shifter gate isnt adjusted right. Try readjusting it.

-or-

There's something wrong inside the T-case.

 

[scotts90ranger]

I agree, to adjust the gate, put the case in 4hi (shift it until you feel the detent, not just til it goes to the stop) then get underneath and loosen the adjustment bolt and move the gate to where it should be in 4hi, tighten the bolt and see if it engages properly.

 

[tenga]

Will do, after I put in my new pilot bearing.