Black and red gauge face?

[Bullfrogx1]

That website has 95 and up but not 94. Do you know any others that do that exact same custom designing thing for a 94?

 

[nitrofan1]

You pretty much have the basic stuff on eBay or you could get them from these guys.

http://www.realtruck.com/nu-image-gauge-face-replacement-kits/R182771P1994Y215M8859A.html

A little pricey but the silver ones look nice.

 

[1ATony]

Those blue gauges look awesome.

 

[mywhip]

What's the easiest/best way to take off the green film for a 2000?

 

[Bullfrogx1]

@nitrofan1 Where did you get your bulbs? The ones I got were cheap and didn't work too well.

 

[nitrofan1]

Superbrightleds.com Great site. Good products, priced right and fast ship. They offer a lot of choices and options. I actually used the single led bulb and it's not as bright as the others but I like the muted soft light vs something too bright that would hurt your eyes.

http://www.superbrightleds.com/

 

[Bullfrogx1]

I don't mean to be too specific but could u give me the link the specific ones that you got? I just want to ensure that I get the right bulbs. Thanks

 

[nitrofan1]

http://www.superbrightleds.com/cgi-bin/store/index.cgi?action=DispPage&Page2Disp=/mini-wedge.html

It's the 194 wedge with single led. Follow the instructions on how to order the correct color . I ordered 10 so as to have a few spares.

 

[Bullfrogx1]

Angle? 120 i'm guessing

 

[mywhip]

How do you remove the green film?

And let's say that i want to paint my needles a red/orange color, what should i use for that?

 

[Ranger Sport Honduras]

u can peel it with a sharp blade or sand it down until its all gone

 

[gearhead51]

I read somewhere on here that a guy used nail polish remover

 

[mywhip]

It's on the back, right?

 

[gearhead51]

It's on the back of the face plate. You have to take the cluster apart and remove the speedometer needle to get to the back of the face. Of you look at odometer gauge cluster removal or somthin called that in the tech libary they show you how to take apart the cluster

 

[mywhip]

What do i use to paint the needle itself? Do i paint just the underside of it, or the whole thing?