• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

again with this POS 98 Mustang


black_demon69

Well-Known Member
Joined
Jun 30, 2013
Messages
1,511
City
AZ
Vehicle Year
1994
Engine
4.0 V6
Transmission
Manual
I am looking for a wiring diagram for the doors Specifically the power windows. also possibly some ideas on trouble shooting the left window not working.

all other windows work and driver window motor was replaced old one was dead. also the window switch on driver has been replaced..

this is a convertible gt 4.6l
 
hmmm.... a car with known wiring issues and an open container of gasoline left inside.... I see possibilities...

AJ
 
Get sexy with it.
 
hmmm.... a car with known wiring issues and an open container of gasoline left inside.... I see possibilities...

AJ
yeah the radio was wired with a light switch behind it and alot of wires were cut and spliced together with wire nuts or duct tape..
 
still have not been able to locate a wiring diagram
 
I have a 2000 coupe v6, besides not having convertible switch should be the same right? I dont have the wiring diagram but I could pop the door panel off and take some pics
 
These are the 2 power window wiring diagrams that came up for 1998 Mustang GT convertible on public library website

If its the drivers door window, and motor was tested, then my money would be on the "one touch module" being bad
Looks like it could be bypassed by connecting the wires on pins 1 and 2(on module) together, or switch white/black wire to motors red wire
 

Attachments

Last edited:
These are the 2 power window wiring diagrams that came up for 1998 Mustang GT convertible on public library website

If its the drivers door window, and motor was tested, then my money would be on the "one touch module" being bad
Looks like it could be bypassed by connecting the wires on pins 1 and 2(on module) together, or switch white/black wire to motors red wire
The one touch module was completely missing so I just bridged the red andwhite/black now it works. Thanks for the reply and the willingness to share your knowledge RonD.... ?
 
I had a issue with the drivers window on a 93 taurus, ended up being that “one-touch” module, had to wire around it as it was a obsolete part when I tried to get another.
 

Sponsored Ad


Sponsored Ad

TRS Events

Member & Vendor Upgrades

For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.

Recently Featured

Want to see your truck here? Share your photos and details in the forum.

Ranger Adventure Video

TRS Merchandise

Follow TRS On Instagram

TRS Sponsors


Sponsored Ad


Sponsored Ad


Amazon Deals

Sponsored Ad

Back
Top