• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

Adding a YORK 210 Air Compressor to the 5.0L w/ PICS


2Krngr

Parts Hoarder
V8 Engine Swap
Joined
Sep 27, 2016
Messages
246
Vehicle Year
2000 Supercab
Engine
Transmission
Manual
Though I would share a couple pics of the install I did of a York 210 Air Compressor onto a 5.0L..

I make a simple bracket to bolt the York onto the engine where the power steering pump used to be. It mounts between the top two a/c compressor bolts, and a tab down behind it to the head.

I cut the stock power steering bracket off of the drivers side, trimmed it down and welded it onto the passenger side underneath of the the alternator. Which fit great.

This kept the York pulley in the same location the power steering pump was, and conveniently relocated the power steering pump to have the belt pulled up between the lower idler pulley and the tensioner pulley with plenty of belt wrap on the ps pump.

I also moved the coilpack bracket over some for clearance, and then lowered it quite a bit mainly because I though it looked better..

After trying a few different belts I found the GATES K061187 was a perfect fit.

Pretty easy and very cheap way to add a great engine driven Air Compressor the 5.0L for air suspension or for offroading.
 
Last edited:
20160527_162851.jpg


20160527_162827.jpg


20160527_162928.jpg
 
Last edited:
20160526_231716.jpg


20160526_231656.jpg
 
Last edited:

Sponsored Ad


Sponsored Ad

TRS Events

Member & Vendor Upgrades

For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.

Recently Featured

Want to see your truck here? Share your photos and details in the forum.

Ranger Adventure Video

TRS Merchandise

Follow TRS On Instagram

TRS Sponsors


Sponsored Ad


Sponsored Ad


Amazon Deals

Sponsored Ad

Back
Top