4r55e to M5R1 = Speedo not working

[Vexy]

After swapping in the 5 speed M5R1, my speedo no longer works. All connections on the transfer case were made, so I don't see how that could be a problem. The column shift was left in the "Park" position before being removed for the swap. Would being in the "Park" position cause the speedo/odometer to not function?

 

[Snoranger]

That cant be the problem... The PRNDL switch (trans range sensor) was on the trans and that isnt there anymore.

 

[Vexy]

The speedo gear connection is on the transfer case, correct? If its on the transmission though, maybe the transmission I swapped in has no gear on it or something. Funny thing is, I dont ever recall removing a cable with a gear attached to it at any point during the swap.

 

[Vexy]

Shouldn't I have a speedo cable coming out of that hole?

 

[Snoranger]

Shouldn't I have a speedo cable coming out of that hole?

No, 94 was the last year that used a speedo cable.

That speed sensor is what tells your speedo how fast youre going.

 

[Vexy]

No, 94 was the last year that used a speedo cable.

That speed sensor is what tells your speedo how fast youre going.

Good to know. Hmm, maybe I should check the wiring first.