• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

2007fordranger4x4 4.0 v6 automatic starter engages won't crank.


Ed ward Todd

New Member
Ham Radio Operator
Joined
Dec 8, 2023
Messages
1
City
Lynchburg Tennessee
Vehicle Year
2007 4x4
Transmission
Automatic
2007fordranger 4x4 4.0 v6 automatic 1st serpentine belt broke. I noticed that the harmonic balance needed replaced and I did. I tried to start but battery was dead. I replaced with a different battery. It started an ran for 20 minutes, i turned it off. A few minutes later drove to gas station filled with gas.tried to start no start like dead battery. I got another hot battery replaced when trying to start dead short.I replaced starter. Now turn key starter sounds like it engaging but no crank. It's been a long frustrating 3 days
 
welcome to the forum!

does the starter sound like its free wheeling or is there a grinding noise?

Your issue sounds like it could be a few things, a miss-wired starter, a faulty starter, the starter could be misaligned, or the flexplate could have stripped teeth.. if you have the ability to post pictures of the starter that could help diagnose them a little.

i would consider removing the starter and bench testing it (you can do it at home with jumper cables, or take it to most auto part stores) to make sure the shuttle is engaging. while its removed i would inspect the flexplate/flywheel for damaged teeth
 

Sponsored Ad


Sponsored Ad

TRS Events

Member & Vendor Upgrades

For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.

Recently Featured

Want to see your truck here? Share your photos and details in the forum.

Ranger Adventure Video

TRS Merchandise

Follow TRS On Instagram

TRS Sponsors


Sponsored Ad


Sponsored Ad


Amazon Deals

Sponsored Ad

Back
Top