-
Welcome Visitor! Please take a few seconds and Register
for our forum. Even if you don't want to post, you can still 'Like' and react to posts.
1996 ranger trouble ive got Qs and some answers
- Thread starter tripodish
- Start date
- Joined
- Jun 1, 2001
- Messages
- 7,897
- Age
- 63
- Vehicle Year
- 1987... sorta
- Transmission
- Manual
more details required.
AD
AD
whocares
Well-Known Member
- Joined
- Dec 25, 2009
- Messages
- 304
- Transmission
- Automatic
You mean like what color is it, does it have a sunroof, 60-40 split or buckets...the important stuff, right?
adsm08
Senior Master Grease Monkey
Supporting Member
Article Contributor
Ford Technician
TRS 20th Anniversary
- Joined
- Sep 20, 2009
- Messages
- 34,623
- City
- Dillsburg PA
- Vehicle Year
- 1987
- Engine
- 4.0 V6
- Transmission
- Manual
- Tire Size
- 31X10.50X15
Simple answer: Because you are MOVING!
Complicated answer: The transfer case gears are not synchronized like the transmission gears are, and the difference in ratio between high and low is roughly the same as the difference between 1st and OD. To get the gears there to line up and drop in without grinding, you basically have to come to a complete stop so that both sets of gears are not moving.
If you are really good at speed shifting you may be able to kill your engine and catch the gear as it spins down. Due to the fact that you are asking this question, I'm going to assume that you do not possess that level of skill and discourage you from trying.
Complicated answer: The transfer case gears are not synchronized like the transmission gears are, and the difference in ratio between high and low is roughly the same as the difference between 1st and OD. To get the gears there to line up and drop in without grinding, you basically have to come to a complete stop so that both sets of gears are not moving.
If you are really good at speed shifting you may be able to kill your engine and catch the gear as it spins down. Due to the fact that you are asking this question, I'm going to assume that you do not possess that level of skill and discourage you from trying.
snomaker321
Well-Known Member
adsm08
Senior Master Grease Monkey
Supporting Member
Article Contributor
Ford Technician
TRS 20th Anniversary
- Joined
- Sep 20, 2009
- Messages
- 34,623
- City
- Dillsburg PA
- Vehicle Year
- 1987
- Engine
- 4.0 V6
- Transmission
- Manual
- Tire Size
- 31X10.50X15
typo? or is he saying he CAN and wants to know why?
good point. I just assumed it was a typo, since if you are for some reason able to shift into Low while moving, that's just a problem, either linkage, or internal to the case.
I guess we do need the details.
R***A**N**G**E***R
Well-Known Member
- Joined
- Oct 3, 2009
- Messages
- 475
- Vehicle Year
- 1996
- Transmission
- Automatic
I can shift mine into 4low ALSO but it doesn't REALLY go into 4 wheel drive mode, get it???
You need to be stopped foot on brake in neutral THEN turn the switch then put in drive.
You are just turning the switch but it doesn't really go into 4low.
Or you have a typo in your post.
You need to be stopped foot on brake in neutral THEN turn the switch then put in drive.
You are just turning the switch but it doesn't really go into 4low.
Or you have a typo in your post.
Last edited:
Similar threads
Sponsored Ad
Sponsored Ad
TRS Events
Member & Vendor Upgrades
For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.
Recently Featured
Ranger Adventure Video
TRS Merchandise
Follow TRS On Instagram
