1994 4.0 V6 4X4 Ext Cab Ranger XLT

[rubycrew]

Finished rebuilt in Nov. 2016, Son rolled it 3 months and less than 3000 miles later.

Parting out to the very last bolt if I can. Only had Comp.

New Starter
New Power steering Pump
Motor Rebuilt (256000 on odometer), rings,oil pump,timing chain, water pump, fan blade, Heavy Duty Cast Iron Headers
New radiator
New Fan shroud
New Dryer for AC
new High Pressure A/C hose
Rewrapped Engine Harness
Transmission is in need of a rebuild
4x4 mechanisims all working
rear axle might be bent at the hub, it took the biggest hit when jumping the curb.
Rear Axle, R6 — 3.73 limited slip
New 4 inch lift kit, new springs, new shocks
New Rear leaf springs (W X)

I live in North Texas. If you need a part that is easy to ship, let me know and I'll ship it to you. Name your price on anything. Body only has the tail gate in great shape. Neighbor has purchase the 31" tires. Need anything from the doors, let me know.

 

[Karu89]

how much would you want for that 3.73 limited slip

 

[rubycrew]

how much would you want for that 3.73 limited slip

I'm open for your best offer, but you only want the gear and not the entire axle right? $120 sound good to you? are you local to North Texas?

 

[rubycrew]

Does it have the chrome grill molding on the front? I will pm you my email and you can send them to that.

The front chrome was mangled on one edge and if you're referring to the top light to light chrome strip, that was actually busted prior to the rollover. The grill was an after market metal that was bent on one end. Not sure if it's salavagable or if you wanted something aftermarket.

You can check with RockAuto.com for the chrome plastic pieces. That is where i was planning on replacing this broken one.

let me know if you still need pictures.

 

[Karu89]

I'm open for your best offer, but you only want the gear and not the entire axle right? $120 sound good to you? are you local to North Texas?

no i'm in rochester,NY and yes just the diff kinda a pain in the winter up here with an open diff but yeah 120 sounds very good i'll PM you my e-mail

 

[94b2300ranger]

Do you have the block plate?

 

[rubycrew]

Do you have the block plate?

Yes I do have it but i'm currently talking to a guy about the engine. Not sure if he needs this as well. i'll let you know once i've spoken to him this weekend.

 

[94b2300ranger]

Yes I do have it but i'm currently talking to a guy about the engine. Not sure if he needs this as well. i'll let you know once i've spoken to him this weekend.

Thank you Sir.

 

[jtaborsky]

Auto or manual? What brand lift kit?

 

[Free07110]

Do you still have the rearend?

 

[d.trombley]

Are you still selling this stuff? Still have the lift kit?

Sent from my VS987 using Tapatalk

 

[Ranger850]

What about the Defrost Vent . The piece that goes along the top of the dash at the windshield.

 

[Canadian_ranger]

Do you have a straight driveshaft?

 

[scrapper]

How much for the engine wiring harness? Shipping to 61756