1993 Front clip on a 1999 Ranger

[Reppiks]

I'm sure this is covered somewhere but, I can't find it. I have a '99 2x4 XLT with front end damage and have a line on a '94 with a toasted motor/tranny and rear damage. Can I take the front clip from the '94 and put it on my '99? (also do the doors interchange?)

 

[adsm08]

Yes, you should be able to do that, and the doors should interchange.

The topic has been covered, not as extensively as the 1st/2nd gen front end swap, and it is always about putting the newer 04+ front end on an older truck, but it should work just fine. You might have to take everything though, including the core and fender supports.