1354E to 1356M

[Denisefwd93]

Just do the deed? anything to be aware of? Is there any electric anything on the Manual Tcase? ( speedo cable model)

 

[RonD]

There is a plunger type switch that could be used for the Dash 4high and 4low lights, not required for operation but was available.

The dash lights get 12v with key on, the two wire switch is a Ground, one for 4high and the other 4low, and of course no light in 2WD
I believe the dash light wires at the 4x4 Module(not needed now) are the same colors as the wires on the Manual switch, so you just have to match them up.
Brown/white for low, and Grey for high, but could be light blue instead of grey

But as said not required, you just need to look down at the shifter to see where its at, lol.

You will need the VSS hooked up with the speedometer cable on 1994 and older


Parts for the 1350/1354 manual shift linkage are nonexistent so make sure you have all the parts before starting, or be prepared to make them yourself
Picture of it here: https://www.ranger-forums.com/engine-drivetrain-116/1354m-transfer-case-shifter-144685/

 

[Denisefwd93]

The one I'm supposed to be getting is coming with the shifter if it's not, I wouldn't be getting it. I've not seen a manual shift T case up-close-and-personal so I don't actually know how the mechanism moves, obviously it's not the same as the electric.