Welcome Visitor! Please take a few seconds and 
ab_slack
Member
- Joined
- Oct 17, 2011
- Messages
- 755
- Reaction score
- 12
- Points
- 18
- Location
- New Joisey
- Vehicle Year
- 1987
- Make / Model
- Ford
- Engine Size
- 2.9L
- Transmission
- Manual
Not exactly a ranger, referring to my 2002 Explorer with 4.6L V8, this has coil on plug arrangement.
Getting very bad ignition noise pickup in my receiver. It was tolerable until a few months ago when I had it in the shop. While in the shop they had pulled the coil packs for some work being done. They suggested replacing the extensions that go from the coil to the plug. No change of the coils. Now the noise is pretty strong.
Any ideas how I could address this? Back with wires I remember it was possible to get resistor wires that reduced noise.
Any help welcome.
Getting very bad ignition noise pickup in my receiver. It was tolerable until a few months ago when I had it in the shop. While in the shop they had pulled the coil packs for some work being done. They suggested replacing the extensions that go from the coil to the plug. No change of the coils. Now the noise is pretty strong.
Any ideas how I could address this? Back with wires I remember it was possible to get resistor wires that reduced noise.
Any help welcome.
