Welcome Visitor! Please take a few seconds and grochala
New Member
- Joined
- Oct 25, 2015
- Messages
- 5
- Reaction score
- 0
- Points
- 0
- Vehicle Year
- 1994
- Make / Model
- Mazda
- Transmission
- Manual
I have been reading up on this swap and it appears that I have 99% of what I need to finish it off. However after ready as many posts, threads and How To's I'm still not clear of the best way to remove my old wiring and install the 5.0 wiring and computer? Do I literally cut everything off the round firewall plug and splice into that or is that overkill?
No one has been clear on this in any of the how to's I've found. So I'm anxious to start lopping off wiring if it's going to cause me heartburn. Some people say only 5-7 wires need spliced to make it all work right. I have all the diagrams to match everything up but not clear as to what is really necessary.
No one has been clear on this in any of the how to's I've found. So I'm anxious to start lopping off wiring if it's going to cause me heartburn. Some people say only 5-7 wires need spliced to make it all work right. I have all the diagrams to match everything up but not clear as to what is really necessary.
