Little Duty
New Member
- Joined
- Apr 7, 2010
- Messages
- 3
- Reaction score
- 0
- Points
- 0
- Vehicle Year
- 1982
- Make / Model
- Mazda
- Engine Size
- 2.2 diesel
- Transmission
- Manual
OK, so I have a 82 Mazda b2200 with a 2.2 Perkins diesel. I bought a 86 ranger with the 4d55t 2.3L turbo diesel. Both trucks are 2 wheel drive with 5 speeds. I already removed both engine, transmissions and drive shafts. My plan is to put the the 4d55t, trans, and drive shaft into the Mazda.
My problem is I thought the 4d55t was completely a mechanical engine but It has a full throttle switch on it. Does any body know If this is a necessary part of the motor to run right? Or am I going to have to do a wiring harness swap too?
If any know anything that might help this swap go easier please let me know.
Thanks
My problem is I thought the 4d55t was completely a mechanical engine but It has a full throttle switch on it. Does any body know If this is a necessary part of the motor to run right? Or am I going to have to do a wiring harness swap too?
If any know anything that might help this swap go easier please let me know.
Thanks