• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

4wd conversion endeavor


Byronator

Member
Joined
Jan 8, 2019
Messages
41
Reaction score
3
Points
8
Location
North Carolina 28762
Vehicle Year
1999
Make / Model
Ford
Engine Size
3.0L V6 flex fuel
Transmission
Manual
I have done a lot of looking, here mostly, on how the 4wd system works in a ranger like mine. I have a 2wd ranger which I'd like to be 4wd. I have done a lot to it so I don't want to part with my ranger and get another one just to get 4wd. I am willing to do all the work to convert it to 4wd, I know it will be hard! So here is what I want to know...
Is there anything major that would have to be done in order to put a 4wd system in other than mounting all the stuff? Looking at diagrams, to me, it looks like all the major parts will mount the same way the 2wd parts do. I want to use the dana 35 system with short arm long arm cv.
 


don4331

Well-Known Member
V8 Engine Swap
Joined
Sep 6, 2013
Messages
2,007
Reaction score
1,329
Points
113
Location
Calgary, AB
Vehicle Year
1999
Make / Model
Ford
Engine Type
V8
Engine Size
5.3
Transmission
Automatic
Byronator:

Does your Ranger have coil springs or torsion bars for front suspension?

If it has torsion bars, its possible to install 4wd from another Ranger of same vintage.

If it has coils - you might as well do as SAS.
 

Byronator

Member
Joined
Jan 8, 2019
Messages
41
Reaction score
3
Points
8
Location
North Carolina 28762
Vehicle Year
1999
Make / Model
Ford
Engine Size
3.0L V6 flex fuel
Transmission
Manual
@don4331

Ah. Yeah that'd be the best approach. But I do not want to do a SAS. I dont' have torsion bars, I have coil springs. Couldn't I add torsion bars to the frame though?
 

adsm08

Senior Master Grease Monkey
Supporting Member
Article Contributor
Ford Technician
TRS 20th Anniversary
Joined
Sep 20, 2009
Messages
34,623
Reaction score
3,613
Points
113
Location
Dillsburg PA
Vehicle Year
1987
Make / Model
Ford
Engine Type
4.0 V6
Engine Size
4.0
Transmission
Manual
2WD / 4WD
4WD
Tire Size
31X10.50X15
Ah. Yeah that'd be the best approach. But I do not want to do a SAS. I dont' have torsion bars, I have coil springs. Couldn't I add torsion bars to the frame though?
No. There are other differences in the frame.

If you do not have torsion bars, your functional options are SAS or find a 4x4 frame.
 

bobbywalter

TRS Technical Staff
TRS Event Staff
V8 Engine Swap
TRS Technical Advisor
TRS Banner 2012-2015
TRS 20th Anniversary
Ugly Truck of Month
TRS Event Participant
Joined
Aug 9, 2007
Messages
23,470
Reaction score
4,667
Points
113
Location
woodhaven mi
Vehicle Year
1988
Make / Model
FORD mostly
Engine Type
V8
Engine Size
BIGGER
Transmission
Automatic
2WD / 4WD
4WD
Total Lift
sawzall?
Tire Size
33-44
My credo
it is easier to fix and understand than "her"
or




build a real a-arm system that functions better then the oem abortion. long arms.


or a ttb....still winning over oem sla off road....


if you want to pound on it off road, way worth it...




a solid axle make it super easy though. stupid easy. not hard.
 

Byronator

Member
Joined
Jan 8, 2019
Messages
41
Reaction score
3
Points
8
Location
North Carolina 28762
Vehicle Year
1999
Make / Model
Ford
Engine Size
3.0L V6 flex fuel
Transmission
Manual
or




build a real a-arm system that functions better then the oem abortion. long arms.


or a ttb....still winning over oem sla off road....


if you want to pound on it off road, way worth it...




a solid axle make it super easy though. stupid easy. not hard.
So a TTB is better than the SLA, how so? It's a lot bulkier. And with a SAS it's just with all showing under the front. I don't like that look as much as the SLA. I would just do the SAS bc I need 4wd for functionality more than anything. I don't really want to use it for off-roading anyway. But where I live, you need 4wd. I'd be down to build an a-arm system but I don't really know how it works.
 

Byronator

Member
Joined
Jan 8, 2019
Messages
41
Reaction score
3
Points
8
Location
North Carolina 28762
Vehicle Year
1999
Make / Model
Ford
Engine Size
3.0L V6 flex fuel
Transmission
Manual
Also, couldn't I just weld some torsion bar mounts to my frame. Like, even if the frame I have doesn't really have a spot for oem bars. I could do in a custom location on frame and all.
 

Captain Ledd

Well-Known Member
Article Contributor
V8 Engine Swap
Joined
Aug 7, 2007
Messages
2,384
Reaction score
39
Points
48
Location
Michigan
Vehicle Year
1984, 1997
Make / Model
Ford
Engine Size
302, 2.3
Transmission
Manual
My credo
If you're not making mistakes, you're not learning.
Even though frames may appear similar, or be from similar vehicles, they're different, and that difference means that much more work. By the time you're done adapting, drilling, cutting, modifying, or just making new from scratch, you'd be way ahead just doing a full custom install.

I opted for a frame swap on mine, though I happened to find another 1997 Ranger SC/SB with all the options I wanted and more with a dead engine. This is probably the easiest swap next to a solid axle swap, and it's still work. I specifically wanted to keep mine near factory for parts availability, I have a FSM for it, and reliability (see Ford engineers comment below)

You'll either need a 4wd trans/t-case combo that's identical to your 2wd transmission, or you'll need to take it all apart and swap the rear output shaft and tail-housing/extension-housing. Option 2, is a divorced case of older vintage, be sure you'll have room for it if you go that route, usually those are huge cases as well.

Honestly, if functional 4wd is what you're going for, SAS it.

Go for a low pinion Dana 30, yes they are weaker, but it'll give you more room due to the pinion being lower and if not beat on with big tires are plenty serviceable in a 4wd application.

Remove the large crossmembers under the engine bay that are in the way and build new ones with more clearance around the axle, be sure they're beef as it's an important structural member. A group of Ford engineers with a crap load of testing resources designed it and as much as we sometimes like to rip on them, they are still WAY smarter than the vast majority of us. You may need to "C" the frame like the low riders do if you're not trying to go for a huge lift.

No matter which way you slice it, it's a ton of work, and aside from a frame swap, is not a particularly amateur project to tackle if you want to put a bunch of miles on it.
 

bobbywalter

TRS Technical Staff
TRS Event Staff
V8 Engine Swap
TRS Technical Advisor
TRS Banner 2012-2015
TRS 20th Anniversary
Ugly Truck of Month
TRS Event Participant
Joined
Aug 9, 2007
Messages
23,470
Reaction score
4,667
Points
113
Location
woodhaven mi
Vehicle Year
1988
Make / Model
FORD mostly
Engine Type
V8
Engine Size
BIGGER
Transmission
Automatic
2WD / 4WD
4WD
Total Lift
sawzall?
Tire Size
33-44
My credo
it is easier to fix and understand than "her"
low pinion? why?


if you just need it to get around sell it and buy a 4x4.
 

Byronator

Member
Joined
Jan 8, 2019
Messages
41
Reaction score
3
Points
8
Location
North Carolina 28762
Vehicle Year
1999
Make / Model
Ford
Engine Size
3.0L V6 flex fuel
Transmission
Manual
new plan?

after looking at little more at the ttb system. I wouldn't mind using it.
The dana 35 ttb I guess. Now how will this fit with my frame?
 
Last edited:

Captain Ledd

Well-Known Member
Article Contributor
V8 Engine Swap
Joined
Aug 7, 2007
Messages
2,384
Reaction score
39
Points
48
Location
Michigan
Vehicle Year
1984, 1997
Make / Model
Ford
Engine Size
302, 2.3
Transmission
Manual
My credo
If you're not making mistakes, you're not learning.
low pinion? why?


if you just need it to get around sell it and buy a 4x4.
Clearance, if you're not going for a huge lift. Not always necessary, but it makes it easier.

Plenty of vehicles use it, and unless you're really putting stress on it they work fine. In certain instances, it can work better. When reversing it's now on the strong side of the gear, which can help when yanking trucks/stuff out backwards.
 

Captain Ledd

Well-Known Member
Article Contributor
V8 Engine Swap
Joined
Aug 7, 2007
Messages
2,384
Reaction score
39
Points
48
Location
Michigan
Vehicle Year
1984, 1997
Make / Model
Ford
Engine Size
302, 2.3
Transmission
Manual
My credo
If you're not making mistakes, you're not learning.
Now how will this fit with my frame?
Ehhh... That's one of those kinds of things where if you have to ask, it's well beyond your skill level.

Short answer: It won't. You're going to have to do a LOT of chopping and modifying.
 

adsm08

Senior Master Grease Monkey
Supporting Member
Article Contributor
Ford Technician
TRS 20th Anniversary
Joined
Sep 20, 2009
Messages
34,623
Reaction score
3,613
Points
113
Location
Dillsburg PA
Vehicle Year
1987
Make / Model
Ford
Engine Type
4.0 V6
Engine Size
4.0
Transmission
Manual
2WD / 4WD
4WD
Tire Size
31X10.50X15
after looking at little more at the ttb system. I wouldn't mind using it.
The dana 35 ttb I guess. Now how will this fit with my frame?
And now we are back to swapping frames.
 

Denisefwd93

Well-Known Member
Joined
May 20, 2015
Messages
2,261
Reaction score
74
Points
48
Location
South East PA
Vehicle Year
1994
Make / Model
Ford
Engine Type
4.0 V6
Engine Size
4.0
Transmission
Manual
2WD / 4WD
4WD
Total Lift
stock, may get leveling springs in front "somday"
Tire Size
235
People are rarely talked out of something they want to do, no matter how expensive or difficult it may be. Keep it or sell it get another one same vintage four-wheel drive make the best out of the two, but it is a lot of work when you can get something for peanuts, there are just so many Rangers out there for sale for almost nothing.. we were going to swap out an automatic for a manual in my other truck, finally I just sold it, and actually came out ahead,
 

don4331

Well-Known Member
V8 Engine Swap
Joined
Sep 6, 2013
Messages
2,007
Reaction score
1,329
Points
113
Location
Calgary, AB
Vehicle Year
1999
Make / Model
Ford
Engine Type
V8
Engine Size
5.3
Transmission
Automatic
Originally Posted by Byronator
Now how will this (TTB) fit with my frame?

Ehhh... That's one of those kinds of things where if you have to ask, it's well beyond your skill level.

Short answer: It won't. You're going to have to do a LOT of chopping and modifying.
Well, the illustrious Jim Oaks asked the same question (although his technically was has anyone done it).

As Adms08 says - for TTB, it is probably easier to swap a pre-'98 frame, front axle & steering than to adapt the '98+ frame. You would just need to do something about the 3" wheelbase difference, assuming this is the regular cab you have in your signature.

Course for just needing 4wd for occasional bad weather day, SLA is the way to go, IMHO. And for that, I would find another '98+ Ranger 4x4 (with same engine) and work from there. This assume you have to much invested in body/engine/sentimental value to walk away from your current truck.

As Denise says, the only reason to modify is when Ford didn't offer it:

Ford didn't offer 5.0 which is why I did the swap myself.
Ford didn't offer long bed on SuperCab, which is again, why I did the mod myself.
And I might do the TTB frame under my truck, because, I want to keep the 4dr cab, and 4dr SuperCab long box was never offered by Ford. (My daughter wants me to restore a '51 F-1 off the farm for her, which might take precedence..)

Note:
I have the tools and like to think I have the skill, but in hip pocket, I have a running 2nd vehicle. :D
 

Sponsored Ad


Sponsored Ad

Staff online

Member & Vendor Upgrades

For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.

Truck of The Month


Kirby N.
March Truck of The Month

Recently Featured

Want to see your truck here? Share your photos and details in the forum.

Follow TRS On Instagram

TRS Events

25th Anniversary Sponsors

Check Out The TRS Store


Sponsored Ad


Sponsored Ad

Sponsored Ad


Amazon Deals

Top