bullitproofranger
New Member
- Joined
- Dec 22, 2008
- Messages
- 151
- Reaction score
- 0
- Points
- 0
- Location
- JO CO, MO
- Vehicle Year
- 1992
- Make / Model
- Toyota
- Engine Size
- 1.5 L
- Transmission
- Manual
I have a 2wd 90 ranger 2.3, and right now I am planning on a Dana 30(XJ, or similar) swap on the front, but theres a guy down the road from me that has had a Chevy/GMC C/K pickup sitting for a number of years, and I was thinking about saving up and offering him some $ for the axles and the leafs,(the chevy is at least a 3/4 ton, late 70's early 80's truck), and I was thinking about taking the front axle and, grinding off the welds at the knuckles and at the pumpkin, and switching sides with the axle tubes and the pumpkin, welding it back up, and then I would have a drivers side diff. so I could use a ford transfer case. would it work? could be done on a weekend? any input is aprecciated, thanks.