• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

Wiring Harness questions/issues


RonD

Well-Known Member
Joined
Jun 2, 2012
Messages
20,416
Reaction score
4,100
Points
113
Location
canada
Vehicle Year
1994
Make / Model
Ford
Transmission
Manual
Yes, thats look like the transmission part of the manual harness

OSS sensor, reverse light plug and rear O2 sensor plug

With the exception of the reverse light plug all the other wires and connectors are there on the automatic harness
 


Rock Auto 5% Discount Code: 70D65189E6D8FF: January 5th, 2022

dude55man

New Member
EMT / Paramedic
U.S. Military - Active
Joined
May 31, 2017
Messages
27
Reaction score
0
Points
1
Vehicle Year
2006
Make / Model
Ford
Transmission
Manual
2WD / 4WD
2WD
So the harness that is on the engine should be able to just plug into the transmission then or?
Also I do have another, odd question with this project
 

dude55man

New Member
EMT / Paramedic
U.S. Military - Active
Joined
May 31, 2017
Messages
27
Reaction score
0
Points
1
Vehicle Year
2006
Make / Model
Ford
Transmission
Manual
2WD / 4WD
2WD
Yes, thats look like the transmission part of the manual harness

OSS sensor, reverse light plug and rear O2 sensor plug

With the exception of the reverse light plug all the other wires and connectors are there on the automatic harness
Just trying to ping ya again here to see if I could go and splice the wires together, or is there something else I need to do?
 

dude55man

New Member
EMT / Paramedic
U.S. Military - Active
Joined
May 31, 2017
Messages
27
Reaction score
0
Points
1
Vehicle Year
2006
Make / Model
Ford
Transmission
Manual
2WD / 4WD
2WD
Alright sorry for the long delay. Work got really hectic. But here's the part of the harness I was able to snag. Hopefully this can work, and if so what wires do I need to put this into?View attachment 67311
After looking back and comparing the two, and I'm seeing that I mainly need to figure out what the 8 pin connector does, and a way to merge/splice the reverse lamp sensor and the, I think, speed sensor into the harness. Would the same colored wires in the automatic harness be the same as the ones in the manual harness? I've been trying to find a diagram of both harnesses, but with no luck. Not too sure if I'm searching the wrong things or just looking right past it
 

RonD

Well-Known Member
Joined
Jun 2, 2012
Messages
20,416
Reaction score
4,100
Points
113
Location
canada
Vehicle Year
1994
Make / Model
Ford
Transmission
Manual
There is no reverse light sensor, its just a switch, on/off that passes 12volts to the bulbs at the back

Diagram attached
purple(vt) / orange(OG) striped wire is 12volts IN from fuse
Black/pink wire is 12v OUT to bulbs

Yes, this shows them to be the same color wires on both manual and auto
 

Attachments

dude55man

New Member
EMT / Paramedic
U.S. Military - Active
Joined
May 31, 2017
Messages
27
Reaction score
0
Points
1
Vehicle Year
2006
Make / Model
Ford
Transmission
Manual
2WD / 4WD
2WD
So then how who I get that to work then? And what about the output shaft sensor?
 


Top