Welcome Visitor! Please take a few seconds and CYBERFUKD
Member
- Joined
- Jun 30, 2020
- Messages
- 47
- Reaction score
- 3
- Points
- 8
- Location
- CA
- Vehicle Year
- 1990
- Make / Model
- Ford Ranger 2.9
- Transmission
- Manual
After tons of research, I decided to go with some Wilwood 4 piston calipers for the front of our 1990 Ranger. They'll be matched to 13" Cobra Rotors. Based on my reading I pulled some 97 Spindles from pick and pull last weekend. I'm going to fab an adaptor for the caliper. I'm going to machine the existing hub to sit inside the rotor caliper. I haven't been able to find any measurements for the hub, so I'm just going to take a bunch of measurements and do our best with the Willwood diagram. I have no idea if the master cylinder is going to work. The truck already has an explorer rear end with disc brakes. Will upgrade the MC if needed. Any advice welcome.
Last edited:
