What u-joints for 92 xlt 2wd reg cab?

[motorapido]

Seeking help confirming if a particular Spicer universal joint is applicable to my 1992 Ranger xlt 2wd/rwd regular cab. O'Reilly lists the following Spicer u-joint and describes its applicability as follows:
Spicer U-Joint - 5-153X

• Universal Joint: Rear Drive Shaft; At Transmission; 1.062 Inch Bearing Cap Diameter; 2 Piece Drive Shaft; Extended Cab; Greaseable; Rear Wheel Drive; With 3.219 Inch O.D. Snap Ring; Diagram Position: 5
  Quantity Per Vehicle: 1
  • Related Documents: RWD - 2 Piece Shaft

I'm not sure if this applies to my Ranger. I have a one-piece drive shaft with one u-joint at both ends. I'm hoping to find the appropriate Spicer brand u-joints, with grease fittings, for both the front u-joint and rear u-joint. Can anybody school me on this topic?

 

[2011Supercab]

Appears to be the correct one, Looks like the 1 piece and 2 piece driveline all use the same U-Joint in all spots.

Fits Rear Driveshaft at Rear Axle; RWD; Standard Cab Pickup; with 1 Piece Rear Driveshaft; 1.062" Bearing Cap
or Rear Driveshaft at Transmission; RWD; Standard Cab Pickup; with 1 Piece Rear Driveshaft; 1.062" Bearing Cap
or Rear Driveshaft at Rear Axle; Extended Cab Pickup; with 2 Piece Rear Driveshaft; 1.062" Bearing Cap
or Rear Driveshaft at Support Bearing; Extended Cab Pickup; with 2 Piece Rear Driveshaft; 1.062" Bearing Cap
or Rear Driveshaft at Transmission; Extended Cab Pickup; with 2 Piece Rear Driveshaft; 1.062" Bearing Cap