• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

What should I do as far as getting a locker?


Snal

New Member
TRS Banner 2012-2015
Joined
Mar 31, 2010
Messages
223
Reaction score
0
Points
0
Location
Sacramento
Vehicle Year
2001
Make / Model
Ford
Engine Size
4.0
Transmission
Automatic
I've got n expo 8.8 with l/s sitting on my porch thats gonna be going under my edge 4.0 when she gets overhauled but I've got some q's first. I'm trying to build a luxury runner but I'm keeping it mid travel or else I'd be doing a full width 9" so I wanna know what you think might be best to do as far as locking it goes. In my head a full blown locker would be best but I don't want a compressor on the truck and an e-locker is more than I wanna spend but I've heard of other locker that don't technically "lock" but are more along the lines of super limited slip. I'm gonna have it regeared with 4.56's to turn the 33's superduper easy and while it's being changed I'm either gonna get new clutches for the stock l/s or upgrade to something that locks a little more but it needs to still be streetable as it's going to be a DD. What are my options?
 


4.0B2

Well-Known Member
Supporting Member
TRS Banner 2012-2015
Joined
Sep 24, 2009
Messages
10,700
Reaction score
151
Points
63
Location
Walls, MS
Vehicle Year
1988
Make / Model
Ford
Engine Size
4.0 v6
Transmission
Automatic
I like my Aussie in the rear..
in the front I'd love to have a selectable tho.

Detroit TrueTrac is a locker/limited slip setup. For the money, I'd get a e-locker tho.

Aussie in a open carrier case gets my vote.
 

scotts90ranger

Well-Known Member
RBV's on Boost
Joined
Feb 28, 2001
Messages
7,925
Reaction score
4,227
Points
113
Location
Dayton Oregon
Vehicle Year
1990, 1997
Make / Model
Ford
Engine Type
2.3 (4 Cylinder)
Engine Size
2.3 Turbo
Transmission
Manual
2WD / 4WD
4WD
Total Lift
6
Tire Size
35"
I'm running an aussie in my truck and love the thing, barely know it's back there unless I'm on the skinny pedal while turning and it just goes places offroad...
 

Surrey

New Member
Joined
Jan 12, 2011
Messages
1,800
Reaction score
10
Points
0
Location
Vancouver, Canada
Vehicle Year
1989
Make / Model
Ford
Engine Size
2.9
Transmission
Automatic
For the price, Aussies are amazing. Warranty is good too... "The No-Nonsense Two Year Limited Warranty has no restrictions on tire size or horsepower." <<< taken off their site.

Thats what will be going front-and-back in my truck when I get money for lockers.
 

4.0B2

Well-Known Member
Supporting Member
TRS Banner 2012-2015
Joined
Sep 24, 2009
Messages
10,700
Reaction score
151
Points
63
Location
Walls, MS
Vehicle Year
1988
Make / Model
Ford
Engine Size
4.0 v6
Transmission
Automatic
I have them front and rear.. I find myself not using 4wd when maybe I should bc of trying to steer when locked. It works great and you can get "used" to it. But I highly recommend a selectable up front.
 

jkent

New Member
Joined
Mar 12, 2013
Messages
89
Reaction score
0
Points
0
Location
Wisconsin
Vehicle Year
1993
Make / Model
Ford
Engine Size
4.0 OHV
Transmission
Manual
detroit would be my #1, otherwise aussie
 

4.0B2

Well-Known Member
Supporting Member
TRS Banner 2012-2015
Joined
Sep 24, 2009
Messages
10,700
Reaction score
151
Points
63
Location
Walls, MS
Vehicle Year
1988
Make / Model
Ford
Engine Size
4.0 v6
Transmission
Automatic
does Detroit make a locker for the 28 spline 8.8?
 

jkent

New Member
Joined
Mar 12, 2013
Messages
89
Reaction score
0
Points
0
Location
Wisconsin
Vehicle Year
1993
Make / Model
Ford
Engine Size
4.0 OHV
Transmission
Manual

4.0B2

Well-Known Member
Supporting Member
TRS Banner 2012-2015
Joined
Sep 24, 2009
Messages
10,700
Reaction score
151
Points
63
Location
Walls, MS
Vehicle Year
1988
Make / Model
Ford
Engine Size
4.0 v6
Transmission
Automatic
14 bolt is another ballgame! lol.. Massive axles!

I just didn't know if they did a 28 spline or not. I knew they did a 31 spline.
 

Captain Ledd

Well-Known Member
Article Contributor
V8 Engine Swap
Joined
Aug 7, 2007
Messages
2,384
Reaction score
39
Points
48
Location
Michigan
Vehicle Year
1984, 1997
Make / Model
Ford
Engine Size
302, 2.3
Transmission
Manual
My credo
If you're not making mistakes, you're not learning.
Detroit TrueTrac is a locker/limited slip setup. For the money, I'd get a e-locker tho.

Aussie in a open carrier case gets my vote.
Detroit TrueTrac is a fancy gear driven L/S, not unlike the Torsen L/S's in FX4 Rangers.

If you want a real locker you're going to spend some $$$. E-locker is probably going to be the cheapest selectable out there.

The ECTED is the L/S locker than can tighten itself up to provide a fair amount of locking action, but it can still slip, and the clutches DO wear out. It's about the only one out there that does this.

I have an Aussie in Deathtrap, and it works pretty good. Still wouldn't want it for a daily driver though, and definitely not for a "luxury runner". Scrounge the extra few hundred dollars and get a selectable locker.
 

jkent

New Member
Joined
Mar 12, 2013
Messages
89
Reaction score
0
Points
0
Location
Wisconsin
Vehicle Year
1993
Make / Model
Ford
Engine Size
4.0 OHV
Transmission
Manual
14 bolt is another ballgame! lol.. Massive axles!

I just didn't know if they did a 28 spline or not. I knew they did a 31 spline.
Oh i know, mine would take anything I could throw at it :headbang:. Quite the change on going from the full floating 14 bolt to the 8.8, but the 8.8 seems to be a pretty stout axle.
 
Last edited:

--weezl--

June 2011 OTOTM Winner
Law Enforcement
OTOTM Winner
TRS Banner 2012-2015
Joined
May 26, 2010
Messages
8,495
Reaction score
182
Points
0
Location
hell
Vehicle Year
2007
Make / Model
Ford
Engine Size
4.0
Transmission
Manual
i'm stuck at the same point, the big ones i'm looking at right now are the powertrax, and lockrite, both made by richmond. though the aussie is now in the mix... only thing i can't figure out is what the hell the differences are between the first two, and which one the aussie is most like...

i even emailed richmond to find the answers, this is how painful the conversation went:

weezl said:
to:techsupport@richmondgear.com

hello, I was looking at the application guide for the powertrax diff, trying to find the proper one for my truck, it is a 2007 ford ranger fx4 level II, which comes stock with a 8.8"rg 31 spline torsen differential (made by zexel torsen)

which part number would be the one i need for my application, I am interested in both the powertrax and lockright, but am not really understanding the differences between them, or which might suit my application better. I typically use my truck for commuting to and from work, short distances, with longer road trips occasionally, and moderate to difficult off road trips once a month or two.

thanks in advance for your help,
reply:
jbrown@midwesttruck.com said:
Sorry, we do not offer a locker to fit into the Torsen carrier. It is only offered to fit into an open carrier or limited slip carrier.
me:
weezl said:
Thank you for the reply, an open carrier is easy to get, are you able to answer my other questions?

Thanks in advance,
him:
jbrown@midwesttruck.com said:
What other questions do you have?
me: (c&p most of my first message)
weezl said:
I was looking at the application guide for the powertrax diff, trying to find the proper one for my truck, it is a 2007 ford ranger with a 8.8"rg 31 spline differential

which part number would be the one i need for my application, I am interested in both the powertrax and lockright, but am not really understanding the differences between them, or which might suit my application better. I typically use my truck for commuting to and from work, short distances, with longer road trips occasionally, and moderate to difficult off road trips once every month or two.
him:
jbrown@midwesttruck.com said:
Open carrier is p/n 92-0688-3108. Limited slip carrier is p/n 92-0688-3128.
me:
weezl said:
And the difference between the lock rite and powertrax?
the last email was sent this morning, i haven't heard back, but i'm thinking about sending a "wow this was painful, if this is how i can expect all of my customer service experiences to be with richmond, maybe i'll just buy a detroit"
 

Frank The Tank

Well-Known Member
TRS Banner 2010-2011
Joined
May 29, 2009
Messages
2,882
Reaction score
43
Points
48
Location
South
I really like the Spartan lockers for a strong budget minded street able locker. I have a Yukon Grizzly in my 9" and I love it and would recommend it to anyone and everyone.... Except the faint of heart on the street.
 

4x4junkie

Forum Staff Member
TRS Forum Moderator
TRS 20th Anniversary
Joined
Aug 19, 2001
Messages
10,749
Reaction score
580
Points
113
Location
So. Calif (SFV)
Vehicle Year
1990
Make / Model
Bronco II
Engine Type
2.9 V6
Engine Size
2.9L V6
Transmission
Manual
2WD / 4WD
4WD
Tire Size
35x12.50R15
i even emailed richmond to find the answers, this is how painful the conversation went:

Not to defend their example of crappy customer service, but some research should've quickly shown nothing they offer fits a Torsen carrier.
What I suspect happened is he ("jbrown") read your email right up to the point he saw "torsen differential", and never bothered to read anything beyond that.
Had you simply asked for a 8.8" 31 spline open carrier application, there would not have been the distraction over the Torsen.

Now as for the rest of it, there's no excuse for that, he could've simply scrolled your email down a little ways and reread your questions (this assuming you didn't delete/backspace out the previous correspondence from the email)

Since you have to get a carrier for yours anyway, I'd just buy the Detroit.


To the OP,
I'd say maybe rebuild the stock L/S, but rearrange the clutch discs for tighter grip (there should be some info on this in the Tech Library). Combined with using slightly less friction additive, you can get some pretty darn good lockup out of it, but without all the clunkiness and unpredictability of automatic lockers.
 

Snal

New Member
TRS Banner 2012-2015
Joined
Mar 31, 2010
Messages
223
Reaction score
0
Points
0
Location
Sacramento
Vehicle Year
2001
Make / Model
Ford
Engine Size
4.0
Transmission
Automatic
well I'm thinking of just redoing the stock clutches. selectable would be too much $ for what I wanna do and I've got an expo 8.8 with ls in my other truck and it seemed fine but I figured I'd go bigger while this new axle is torn apart.
 

Sponsored Ad


Sponsored Ad

Staff online

Member & Vendor Upgrades

For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.

Truck of The Month


Kirby N.
March Truck of The Month

Recently Featured

Want to see your truck here? Share your photos and details in the forum.

Follow TRS On Instagram

TRS Events

25th Anniversary Sponsors

Check Out The TRS Store


Sponsored Ad


Sponsored Ad

Sponsored Ad


Amazon Deals

Top