Changed the oil. Walmart was out of FL-910S filters so I got an FL-400S since I read elsewhere that it's the same thread size, just a little bit longer. Might be a little easier to remove the next time.
$5 rebate on 5 quart jugs of Valvoline Synpower right now.
That's good to know. My Wal-Mart is always out of the 910s here. I've been going to Oriellys just because. Some times they have a deal for 5 quarts and a filter. But never on the synthetic. Plus we need 2 more quarts to fill these things. We'll about 1.25 or so.
The pressure relief valve is higher on the FL-400S, and the micron rating is different. Proceed with caution, especially if your motor is under warranty.
FL-910S Specifications:
Thread Inside Diameter (in.): 3/4"-16
Outside Diameter Top (in.): 3.15"
Outside Diameter Bottom (in.): 3.15"
Length (in.): 3.36"
Spin-On Filter: Yes
Bypass Valve: YES
Color: White
Burst Pressure (PSI): 250 PSI
Pressure Relief Valve: YES
PSI Relief: 14.5 PSI
Micron Rating: 50%@35um
Height (in.): 3.36"
Seal Outside Diameter (in.): 2.75"
Seal Inside Diameter (in.): 2.40"
Anti-Drainback Valve: YES
FL-400 Specifications:
Thread Inside Diameter (in.): 3/4"-16
Outside Diameter Top (in.): 2.98"
Outside Diameter Bottom (in.): 2.98"
Length (in.): 4.14"
Spin-On Filter: Yes
Bypass Valve: YES
Color: White
Burst Pressure (PSI): 250 psi
Pressure Relief Valve: YES
PSI Relief: 20 PSI
Micron Rating: 80%@20um
Height (in.): 4.14"
Seal Outside Diameter (in.): 2.75"
Seal Inside Diameter (in.): 2.40"
Anti-Drainback Valve: Yes