jcook100
Member
- Joined
- Apr 5, 2019
- Messages
- 88
- Reaction score
- 10
- Points
- 8
- Location
- Salt Lake City, UT
- Vehicle Year
- 1991
- Make / Model
- Ford Ranger
- Transmission
- Manual
Hello,
Can someone explain what each of these vacuum lines is going to and what their purpose/function is?
#1 - Goes down into a bundle of wires just above the air box
#2 - (Disconnected) - Goes directly into the air box
#3 - Goes into some sort of cylindrical canister up near the windshield
#4 - Sits on top of the engine, between the passenger side valve cover and the intake manifold, and enters some sort of valve (?) that has a braided line coming out of it
Also, as you can see in the one picture, the lines going to #1 and #3 actually start as a single vacuum line that has a "T" split in it. Is this normal or was it jerry-rigged at some point?
Thanks!
Can someone explain what each of these vacuum lines is going to and what their purpose/function is?
#1 - Goes down into a bundle of wires just above the air box
#2 - (Disconnected) - Goes directly into the air box
#3 - Goes into some sort of cylindrical canister up near the windshield
#4 - Sits on top of the engine, between the passenger side valve cover and the intake manifold, and enters some sort of valve (?) that has a braided line coming out of it
Also, as you can see in the one picture, the lines going to #1 and #3 actually start as a single vacuum line that has a "T" split in it. Is this normal or was it jerry-rigged at some point?
Thanks!
Attachments
-
134.6 KB Views: 57
-
114.9 KB Views: 57