Trying to source replacement T55 seat bolt for 07

[PetroleumJunkie412]

Removing the helicoil and going direct to the new threads has occurred to me as well. Certainly seems like the simplest approach. The shop didn't charge much for the helicoil.

I would hope not. That's a complete hack job. Post it to their google reviews if you'd like it corrected for free.

Just my $0.02

 

[Grumpaw]

Yeah, just remove the helicoil and treat the threaded hole as just a hole to run a bolt thru. Don't mess with trying to re-thread the hole again.

 

[ericbphoto]

Yeah, just remove the helicoil and treat the threaded hole as just a hole to run a bolt thru. Don't mess with trying to re-thread the hole again.

I would drill it to 1/2” and use a 1/2” bolt with washers and lock nut like mentioned above.

 

[ThermionicEmissions]

I would hope not. That's a complete hack job. Post it to their google reviews if you'd like it corrected for free.

Just my $0.02

They'll repair it for free without all that. This shop stands by there work.

 

[Dirtman]

My 5 year old nephew can install a helicoil better than that...

 

[Guanfy]

If you have your heart set on a replacement Torx bolt, try www.belmetric.com I've found them to have just about every metric fastener under the sun.