Vciferni
New Member
- Joined
- Jul 24, 2015
- Messages
- 9
- Reaction score
- 0
- Points
- 1
- Transmission
- Automatic
Replaced the slave cylinder, hydraulic line and master cylinder in my ranger and got it all together and can’t get it to bleed. I’m using a motive pressure bleeder and pumping it up to 20lbs and bleeding it and it feels great. But when I disconnect the pressure bleeder the pedal looses all pressure and hits the floor. I’m following the directions on the pressure bleeder exactly. Also when I try bleeding it with my brother and pumping it with the pedal, we get no pressure build up.