• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' the posts that you read.

Trouble bleeding with motive bleeder


Vciferni

New member
Joined
Jul 24, 2015
Messages
8
Reaction score
0
Points
1
Transmission
Automatic
Replaced the slave cylinder, hydraulic line and master cylinder in my ranger and got it all together and can’t get it to bleed. I’m using a motive pressure bleeder and pumping it up to 20lbs and bleeding it and it feels great. But when I disconnect the pressure bleeder the pedal looses all pressure and hits the floor. I’m following the directions on the pressure bleeder exactly. Also when I try bleeding it with my brother and pumping it with the pedal, we get no pressure build up.
 


Rock Auto 5% Discount Code: 4FF3E9EEA14805 Expires: October 1st, 2020

Bird76Mojo

Well-known member
Joined
Jun 28, 2009
Messages
2,144
Reaction score
934
Points
113
Location
nunya
These systems usually need bench bled before ever installing them. They really should be hung up overnight..


 


Top