Welcome Visitor! Please take a few seconds and 
- Joined
- Sep 14, 2020
- Messages
- 486
- Reaction score
- 434
- Points
- 63
- Location
- usa
- Vehicle Year
- 99
- Make / Model
- ranger
- Engine Type
- V8
- Engine Size
- 347
- Transmission
- Manual
- 2WD / 4WD
- 2WD
- Total Drop
- lower
- Tire Size
- 235 on 15s
so my swap goes like this: 99 ranger 2.5 5spd with 98 expo donor vehicle.
what are my options/ solutions to feeding this 5.0. ive dropped both tanks hoping to just swap sending units and take return line from expo. well thats not going to work the expo unit is taller and bolts in vs ranger (returnless) "screws in". tech section says to simply add a return line, but thats kinda vague, help please
what are my options/ solutions to feeding this 5.0. ive dropped both tanks hoping to just swap sending units and take return line from expo. well thats not going to work the expo unit is taller and bolts in vs ranger (returnless) "screws in". tech section says to simply add a return line, but thats kinda vague, help please
