Rimjam
Active Member
- Joined
- Oct 26, 2018
- Messages
- 264
- Reaction score
- 114
- Points
- 43
- Location
- Huntsville,AL
- Vehicle Year
- 1988
- Make / Model
- Ford
- Engine Type
- 2.9 V6
- Engine Size
- 2.9
- Transmission
- Automatic
- 2WD / 4WD
- 4WD
- My credo
- Health is wealth
Got a pair of decent beige cloth bucket seat from the local recycle yard. Would like to swap driver and passenger bottoms & tops because the pass side is in better shape,
especially the padding. Looks like seat bottoms are the same, frame & all. Looks like seat uppers are not the same - frame is different. Can I switch the tilt/recline mechanism on the bottoms & move pass to driver and vice versa? Can I slip the covers off the seat uppers & reinstall them on the opposite side?
Couple photos to illustrate my thoughts:
especially the padding. Looks like seat bottoms are the same, frame & all. Looks like seat uppers are not the same - frame is different. Can I switch the tilt/recline mechanism on the bottoms & move pass to driver and vice versa? Can I slip the covers off the seat uppers & reinstall them on the opposite side?
Couple photos to illustrate my thoughts:
Attachments
-
112.8 KB Views: 84
-
91 KB Views: 97
-
121.1 KB Views: 81
Last edited: