• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

RUBBER Body Mounts - Compatibility?


Captain Ledd

Well-Known Member
Article Contributor
V8 Engine Swap
Joined
Aug 7, 2007
Messages
2,384
Reaction score
39
Points
48
Location
Michigan
Vehicle Year
1984, 1997
Make / Model
Ford
Engine Size
302, 2.3
Transmission
Manual
My credo
If you're not making mistakes, you're not learning.
Frame swapping my '97, having a HECK of a time finding new body mounts. Not the bracket part, the rubber doughnut parts and hardware. Both mine and the donor's are all cracked/exploded/too-hard/or missing. I've tried a polyurethane set and I immediately sent it back. Some of you have heard they're "harder than stock" you know, because performance.... Well FYI, it's not that far off from a chunk of ABS plastic hard.

I'm not spending all this effort converting my beloved to 4wd and completely mechanically rebuilding it to just trash my ride quality like that.

So where can I find these unicorns? Are there similar Ford mounts that will fit? I need all 6 and I'll need hardware too (rust belt ya know), I have the ability to fabricate any type of shim or spacer if necessary. At this point I'm honestly considering casting my own bushings out of much softer poly.
 


tinman_72

Active Member
Joined
Apr 14, 2008
Messages
529
Reaction score
136
Points
43
Location
North Georgia
Vehicle Year
1993
Make / Model
Ford
Engine Type
2.5 (4 Cylinder)
Engine Size
2.5
Transmission
Manual
2WD / 4WD
2WD
Total Lift
Factory
Total Drop
None
Tire Size
255/60R15
My credo
RoHS compliant
I got mine from LMC Truck. Rubber and hardware,
 

85_Ranger4x4

Forum Staff Member
TRS Event Staff
TRS Forum Moderator
Article Contributor
V8 Engine Swap
OTOTM Winner
TRS Banner 2010-2011
TRS 20th Anniversary
VAGABOND
TRS Event Participant
Joined
Aug 7, 2007
Messages
32,213
Reaction score
17,528
Points
113
Location
SW Iowa
Vehicle Year
1985
Make / Model
Ford
Engine Type
V8
Engine Size
5.0
Transmission
Manual
FWIW I have no complaints with poly mounts, James duff sells a kit with hardware.
 

Captain Ledd

Well-Known Member
Article Contributor
V8 Engine Swap
Joined
Aug 7, 2007
Messages
2,384
Reaction score
39
Points
48
Location
Michigan
Vehicle Year
1984, 1997
Make / Model
Ford
Engine Size
302, 2.3
Transmission
Manual
My credo
If you're not making mistakes, you're not learning.
When I checked LMC truck they only offered poly replacements.

85Ranger, did yours feel similar to what would be considered OEM rubber? Maybe it's just the ones I've looked at?
 

85_Ranger4x4

Forum Staff Member
TRS Event Staff
TRS Forum Moderator
Article Contributor
V8 Engine Swap
OTOTM Winner
TRS Banner 2010-2011
TRS 20th Anniversary
VAGABOND
TRS Event Participant
Joined
Aug 7, 2007
Messages
32,213
Reaction score
17,528
Points
113
Location
SW Iowa
Vehicle Year
1985
Make / Model
Ford
Engine Type
V8
Engine Size
5.0
Transmission
Manual
Maybe a little firmer... mine were a long ways from being fit to judge OEM from though...



I used an Energy Suspension kit. I drove it across four states almost to Pennsylvania last fall and it seemed ok.

My center cab mount hardware didn't survive so I basically made my own with big washers and steel tubing, here is a whole hardware kit:

 

tinman_72

Active Member
Joined
Apr 14, 2008
Messages
529
Reaction score
136
Points
43
Location
North Georgia
Vehicle Year
1993
Make / Model
Ford
Engine Type
2.5 (4 Cylinder)
Engine Size
2.5
Transmission
Manual
2WD / 4WD
2WD
Total Lift
Factory
Total Drop
None
Tire Size
255/60R15
My credo
RoHS compliant
When I checked LMC truck they only offered poly replacements...
Now that you mention it I seem to recall having the same issue. (It has been 7 years since I did my frame-off resto.) I used poly bushings and hardware, all from LMC. As I recall, the bushings were Energy Suspension. I did new front and rear heavy-duty springs and all poly suspension bushings at the same time. Yes, it is very stiff and with 255/60-15's is quite possibly the best handling (as far as taking curves goes) vehicle I have ever owned.
I imagine if I had to drive it more than an hour or two it would be very tiring. If you are only doing body mounts in poly you will probably be okay.
 

19Walt93

Well-Known Member
Ford Technician
V8 Engine Swap
Joined
Nov 13, 2018
Messages
4,475
Reaction score
4,412
Points
113
Location
Canaan,NH
Vehicle Year
1993
Make / Model
Ford Ranger
Engine Type
V8
Engine Size
351
Transmission
Automatic
2WD / 4WD
2WD
Total Drop
3"
Tire Size
235/55R16
My credo
If you don't have time to do it right will you have time to do it over?
I used the poly mounts that came with my truck. When I got it, the mounts under the core support were missing, the stock under floor mounts were still there but had 7/16 coarse thread bolts in them instead of 12x 1.75's so they wouldn't have held much, and the rear cab mounts were comprised of 1 hockey puck per side with 36 flat washers stacked up. I hope the poly mounts won't bee too noisy, the cab and box line up well.
 

Captain Ledd

Well-Known Member
Article Contributor
V8 Engine Swap
Joined
Aug 7, 2007
Messages
2,384
Reaction score
39
Points
48
Location
Michigan
Vehicle Year
1984, 1997
Make / Model
Ford
Engine Size
302, 2.3
Transmission
Manual
My credo
If you're not making mistakes, you're not learning.
2-3 hour trips are pretty much going to be the typical trip use for this truck. With several longer ones thrown in there too, 8-10 hours. Even my normal commute to/from work is 45 minutes.

With converting to 4x4, I'm not looking for a corner carver. Truthfully it sees almost all highway use, but obviously once the destination is reached... I already have a rear ARB too, and I've still needed more tractive effort.

I wonder if I can just get some rubber round stock (I suppose square would work for that matter), I'm thinking more and more about making my own softer mounts.
 

85_Ranger4x4

Forum Staff Member
TRS Event Staff
TRS Forum Moderator
Article Contributor
V8 Engine Swap
OTOTM Winner
TRS Banner 2010-2011
TRS 20th Anniversary
VAGABOND
TRS Event Participant
Joined
Aug 7, 2007
Messages
32,213
Reaction score
17,528
Points
113
Location
SW Iowa
Vehicle Year
1985
Make / Model
Ford
Engine Type
V8
Engine Size
5.0
Transmission
Manual
2-3 hour trips are pretty much going to be the typical trip use for this truck. With several longer ones thrown in there too, 8-10 hours. Even my normal commute to/from work is 45 minutes.
Yeah, it was roughly 13 hours of driving each way IIRC to the roundup. No regrets on the cab mounts.
 

Shran

Junk Collector
TRS Forum Moderator
Supporting Member
Article Contributor
V8 Engine Swap
Solid Axle Swap
Joined
Mar 4, 2008
Messages
8,637
Reaction score
4,704
Points
113
Location
Rapid City SD
Engine Type
V8
Engine Size
5.0
I have used the Prothane kit twice now and am fairly pleased with it... they are quite hard though. I'd rather go with rubber but they were outrageously expensive when I priced them out last, somewhere in the neighborhood of $300 IIRC.
 

Captain Ledd

Well-Known Member
Article Contributor
V8 Engine Swap
Joined
Aug 7, 2007
Messages
2,384
Reaction score
39
Points
48
Location
Michigan
Vehicle Year
1984, 1997
Make / Model
Ford
Engine Size
302, 2.3
Transmission
Manual
My credo
If you're not making mistakes, you're not learning.
Honestly, I'm perfectly ok with spending $300+, if that'll last another 10-15 years and another 150,000 miles this truck will be 33/38 years old with close to 400,000 on it. Assuming no catastrophic incidents it'll be time for a full rotisserie at that point.
 

Sponsored Ad


Sponsored Ad

Members online

No members online now.

Today's birthdays

Member & Vendor Upgrades

For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.

Latest posts

Truck of The Month


Kirby N.
March Truck of The Month

Recently Featured

Want to see your truck here? Share your photos and details in the forum.

Follow TRS On Instagram

TRS Events

25th Anniversary Sponsors

Check Out The TRS Store


Sponsored Ad


Sponsored Ad

Sponsored Ad


Amazon Deals

Top