• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

Removing spindle bearings?

whitetrash96

Member
Joined
Aug 10, 2007
Messages
66
Reaction score
0
Points
6
Location
East Kootenays
Transmission
Automatic
Anyone have any good ideas on how to remove my spindle bearings? I found this thread http://www.therangerstation.com/tech_library/spindlebearing.html
but I don't have a slide hammer and was hoping there was some other way. If you have a picture of a slide hammer with the proper attachment I would love to see the 'proper way' of removing the bearing. Thanks.
 


kevinsranger

New Member
Joined
Apr 9, 2008
Messages
1,092
Reaction score
3
Points
0
Age
42
Location
edison nj
Vehicle Year
1994
Make / Model
FORD
Transmission
Automatic
Anyone have any good ideas on how to remove my spindle bearings? I found this thread http://www.therangerstation.com/tech_library/spindlebearing.html
but I don't have a slide hammer and was hoping there was some other way. If you have a picture of a slide hammer with the proper attachment I would love to see the 'proper way' of removing the bearing. Thanks.
i always knock them out with a brass drift or screwdriver and a hammer, i think the slide hammer is a little over complicated unless you are intending on reusing the bearings
 

Sasquatch_Ryda

Well-Known Member
Ford Technician
OTOTM Winner
Solid Axle Swap
Forum Staff - Retired
TRS Banner 2012-2015
Joined
Aug 8, 2007
Messages
7,914
Reaction score
92
Points
48
Age
35
Location
Terrace, BC, Canada
Vehicle Year
1991
Make / Model
Ford
Engine Type
4.0 V6
Engine Size
4.0L
Transmission
Automatic
2WD / 4WD
Solid Axle Swap 4x4
Tire Size
40s
Yeup, I use a long drift to get them out and a socket and hammer to tap them back in.
 

Sponsored Ad


Sponsored Ad

Top