- Joined
- Aug 27, 2022
- Messages
- 19
- Reaction score
- 7
- Points
- 3
- Location
- New Hampshire
- Vehicle Year
- 2005 3.0l
- Make / Model
- Ford Ranger
- Transmission
- Manual
I believe that you're right and on to something!
Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.
I believe that you're right and on to something!
JET products don't really have a good reputation, so my gut says to start by ditching them, at least for comparison. The power module probably just adds fuel if it does anything at all.
What size are the fuel injectors? Flex fuel injectors were larger than injectors in the non-flex 3.0, so if you have a non-flex 3.0 and put flex fuel injectors in it, it will run too rich.
There was a time where factory Ford injectors were different colors for different flow rates. I think that changed when they went to the thinner bodied EV6 injectors. And all bets are off if you're talking about aftermarket injectors.For some reason I thought different flow injectors were different colors.?
Are the o2 sensor plugs on the correct bank? As in Accidentally swapped sides.
Those headers look awesome