deezkits
Member
- Joined
- May 29, 2019
- Messages
- 57
- Reaction score
- 3
- Points
- 8
- Location
- Southeastern PA
- Vehicle Year
- 2002
- Make / Model
- Ranger Edge 4.0
- Transmission
- Manual
This is for a 2002 Ranger 4x4 Supercab. I confirmed that I do indeed have a 8.8 4.10 nonLSD differential. Confirmed it by my axle tag, door jamb sticker, shape of diff cover and measuring the 2.8" axle tubes. So in prep for changing my wheel bearings in the back I bought bearings and seals from NAPA, but after pulling the old ones I realize that my actual hardware is smaller. I did find and purchase the correct bearings now (I hope it is in fact #5707) but I keep getting the wrong seal type (I have the lipped type vs the enclosed U shaped seal)
I found this seal through Ford's site https://parts.ford.com/shop/en/us/brakes/other-brake-parts/seal-7858633-1 and it's the first time I've seen the one with a lip match up to my truck. But the dimensions are off on it. Mine measures about .570" thick and a few thou under 2.300" on the main OD.
I found this seal through Ford's site https://parts.ford.com/shop/en/us/brakes/other-brake-parts/seal-7858633-1 and it's the first time I've seen the one with a lip match up to my truck. But the dimensions are off on it. Mine measures about .570" thick and a few thou under 2.300" on the main OD.
Last edited: