Ranger Station data sheet, vehicle dimensions, clarification needed

[corerftech]

On this site is a nice simple year grouped chart for Ranger basic dimension, curb weights, etc.

There is a diagram of a truck on end and profile.
On end, 83-92 vehicle shows rear axle width as 54.6 and front as 55

The question: this is hub to hub, correct? (Wheel mounting face of a disc for front or maybe a drum face for rear)

I am away from a vehicle to verify and will be for a bit. Need to verify so the gears in my head can keep grinding away on a plan.

Link below for reference.
Thanks in advance

Ford Ranger Dimensions - The Ranger Station

Do you need to know the measurements of a stock Ford Ranger: 1983-1992 Ford Ranger: 1983-1992 Ford Ranger Vehicle Dimensions Regular cab short bed (6′) Regular cab long bed (7′) Extended cab (First Super Cab was 1986) Wheelbase, in. … Continued

www.therangerstation.com

 

[don4331]

Yes, disc face to disc face on front, drum to drum on rear.

It's actually track, which is you are running 0mm offset rims would equal face to face distance...

Actual WMS to WMS is 56.5" on '83-'92 from here: https://www.therangerstation.com/tech/ford-7-5-inch-rear-axle-history-specs/
Which is weird as Ranger rims are 0-12mm offset, not the 25mm that is implied..