• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

Project punisher


Lil-Pony

Active Member
TRS Banner 2012-2015
Joined
Nov 6, 2012
Messages
1,085
Reaction score
5
Points
38
Age
30
Location
San Antonio, TX
Vehicle Year
1984
Make / Model
Take a Guess
Engine Size
2.8 soon to be 4bt
Transmission
Automatic
Well ive done alot and took very few photos but i thought i might share the progress.

First off i installed a 4" spindle lift then a 2 coil spring lift to total 6"



Sent from outer space.
 


Lil-Pony

Active Member
TRS Banner 2012-2015
Joined
Nov 6, 2012
Messages
1,085
Reaction score
5
Points
38
Age
30
Location
San Antonio, TX
Vehicle Year
1984
Make / Model
Take a Guess
Engine Size
2.8 soon to be 4bt
Transmission
Automatic
Image spam!!!









 
Last edited:

Lil-Pony

Active Member
TRS Banner 2012-2015
Joined
Nov 6, 2012
Messages
1,085
Reaction score
5
Points
38
Age
30
Location
San Antonio, TX
Vehicle Year
1984
Make / Model
Take a Guess
Engine Size
2.8 soon to be 4bt
Transmission
Automatic

About ready to begin the wire harness swap


Sent from outer space.
 

Lil-Pony

Active Member
TRS Banner 2012-2015
Joined
Nov 6, 2012
Messages
1,085
Reaction score
5
Points
38
Age
30
Location
San Antonio, TX
Vehicle Year
1984
Make / Model
Take a Guess
Engine Size
2.8 soon to be 4bt
Transmission
Automatic
Note to self. Aftermarket valve covers cause clearance issues...
 

Lil-Pony

Active Member
TRS Banner 2012-2015
Joined
Nov 6, 2012
Messages
1,085
Reaction score
5
Points
38
Age
30
Location
San Antonio, TX
Vehicle Year
1984
Make / Model
Take a Guess
Engine Size
2.8 soon to be 4bt
Transmission
Automatic
Well since ive been the only one posting on this, does anyone know if the master cylinder on the explorer need to be swaped over for the 8.8 disc brakes or does both the mast cyld and booster need to be swaped
 

RangerSVT

Oct 09 OTOTM
Article Contributor
V8 Engine Swap
OTOTM Winner
Solid Axle Swap
RBV's on Boost
ASE Certified Tech
TRS Banner 2010-2011
TRS Banner 2012-2015
Joined
Mar 15, 2009
Messages
7,883
Reaction score
53
Points
48
Location
TRS since 2002 - NW KY
Vehicle Year
19962002
Make / Model
Ford
Engine Size
GT-40 5.0L EFI W/AC
Transmission
Automatic
Nope, both use the same master cylinder. Nice build. Sub'd


SVT
 

win

Member
U.S. Military - Veteran
V8 Engine Swap
Joined
Jan 13, 2014
Messages
335
Reaction score
12
Points
18
Vehicle Year
2002
Make / Model
Ford
Engine Size
5.0
Transmission
Automatic
does anyone know if the master cylinder on the explorer need to be swaped over for the 8.8 disc brakes or does both the mast cyld and booster need to be swaped
No need to muck around with the booster or master cylinder. The Ranger bits should work fine with the Expo 8.8 and its disks.

Only problem I had was getting the parking brakes to work correctly. Had to shorten the "mid" cable by 2". Expo rear cables, modded the mid cable and used the Ranger parking brake pedal assembly.
 

Lil-Pony

Active Member
TRS Banner 2012-2015
Joined
Nov 6, 2012
Messages
1,085
Reaction score
5
Points
38
Age
30
Location
San Antonio, TX
Vehicle Year
1984
Make / Model
Take a Guess
Engine Size
2.8 soon to be 4bt
Transmission
Automatic
Thats great to know, already swaped it over since i had to swap the brake pedals. Does anyone know anything about the motor mount plates. I know the passenger side has a offset but is it an up ir down offest
 

win

Member
U.S. Military - Veteran
V8 Engine Swap
Joined
Jan 13, 2014
Messages
335
Reaction score
12
Points
18
Vehicle Year
2002
Make / Model
Ford
Engine Size
5.0
Transmission
Automatic
Its an upward offset that lowers that side of the engine the thickness of the plate.

When installed, the bottom of the block's bosses are level with the bottom of the plate.
 

Lil-Pony

Active Member
TRS Banner 2012-2015
Joined
Nov 6, 2012
Messages
1,085
Reaction score
5
Points
38
Age
30
Location
San Antonio, TX
Vehicle Year
1984
Make / Model
Take a Guess
Engine Size
2.8 soon to be 4bt
Transmission
Automatic
Hmm, ive read something special about a spacer needing to be removed on the passenger side.
 

Lil-Pony

Active Member
TRS Banner 2012-2015
Joined
Nov 6, 2012
Messages
1,085
Reaction score
5
Points
38
Age
30
Location
San Antonio, TX
Vehicle Year
1984
Make / Model
Take a Guess
Engine Size
2.8 soon to be 4bt
Transmission
Automatic
Its an upward offset that lowers that side of the engine the thickness of the plate.



When installed, the bottom of the block's bosses are level with the bottom of the plate.

Thanks for the info
 

Jbrown1238

Member
Joined
Sep 3, 2010
Messages
691
Reaction score
6
Points
18
Location
Largo, Fl
Vehicle Year
2003
Make / Model
Ford
Engine Size
306
Transmission
Manual
My credo
None

Lil-Pony

Active Member
TRS Banner 2012-2015
Joined
Nov 6, 2012
Messages
1,085
Reaction score
5
Points
38
Age
30
Location
San Antonio, TX
Vehicle Year
1984
Make / Model
Take a Guess
Engine Size
2.8 soon to be 4bt
Transmission
Automatic
On the stock mastercylinder, does anyone know the purpose of the adapter that screws in the rear port???
 

Lil-Pony

Active Member
TRS Banner 2012-2015
Joined
Nov 6, 2012
Messages
1,085
Reaction score
5
Points
38
Age
30
Location
San Antonio, TX
Vehicle Year
1984
Make / Model
Take a Guess
Engine Size
2.8 soon to be 4bt
Transmission
Automatic

Sponsored Ad


Sponsored Ad

Staff online

Member & Vendor Upgrades

For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.

Truck of The Month


Kirby N.
March Truck of The Month

Recently Featured

Want to see your truck here? Share your photos and details in the forum.

Follow TRS On Instagram

TRS Events

25th Anniversary Sponsors

Check Out The TRS Store


Sponsored Ad


Sponsored Ad

Sponsored Ad


Amazon Deals

Top