3.0ranger1227
New Member
- Joined
- Apr 20, 2009
- Messages
- 998
- Reaction score
- 11
- Points
- 0
- Vehicle Year
- 2003
- Make / Model
- Ford
- Engine Size
- 3.0L
- Transmission
- Automatic
Ok so my power mirrors had completely stopped working for a few weeks. Went in and pressed the pins back in place on the back of the switch and now they're back to what they were doing before. Only the left and down work. Both sides do the same thing. From the wiring diagram I found there are seven wires: power and ground, pass side vertical, pass side horizontal, drivers side vertical, drivers side horizontal, and what I think is the ground for all 4 motors. As best I can figure out, the motors are only getting power in one direction. Is this a sign of a bad wire somewhere or a bad switch or something else?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk