pics

[off_road_junkie21]

Would like to get some pics of how the exhaust is and the heater box once a v8 is in. I have a 3inche body lift allready so pics with that to will help alot. Thanks guys

 

[Iron Ranger]

Here's one of the heater box. As you can see, no mods are necessary. (Unless you have one of those A/C boxes, which I do not have).

Here's one of exhaust clearance.

Mine is a 302. The headers were very close to the frame and I had to notch the pass. side one a little to clear it. These pics were also taken with a 3" body lift installed, which I do not have anymore.

 

[RangerSVT]

Paul, what headers do you have again?? I have the 89500's, but never installed them, never even tried..
SVT

 

[BLOODBANE]

Heres mine with the 89500's.(2" BL)

This (of course) is the passenger side. Not a lot of room, but is squeaked by. The driver side has a lot more room(like above post).
Heater box.

My notching was a little extreme, but it still works(fairly well).

 

[off_road_junkie21]

Sweet pics guys one of the reasons i was wanting pics is cause i want to use gt40p heads.

 

[RangerSVT]

The problem with the GT 40 "P" heads is that you are limited to what headers will work with it due to the spark plug being angled, requires regular headers to be modified...GT 40 heads work with regular headers...
SVT

 

[off_road_junkie21]

I new that allready. I found some hearders that might work. Here is the part #1515. Just dont know if i would have enough room in the engine bay.