Photos of Lifted RBV's With Different Lift & Tire Sizes

[Tristan]

bumper is nice

Here is my 1994 Ranger extended cab with 3" of body lift and 31X10.5X15 Super Swamper TSL tires. no body modifications to the fender wells.

hey i love that front bumper/brushguard + winch you have... where did you get that???

 

[fordman49450]

I built the front and rear bumpers from scratch. Thanks for the comment. The winch I bought from Jim here on TRS fab and off road.

 

[MUDDING B-3000]

this is when i first bought my truck

this is my truck now

 

[Hahnsb2]

3" Body lift, 34x10.50s, minor trimming to front and rear of the front fenders and front of rear fenders.

 

[Jon Boy]

figured i would post up for the guy's not looking for big lift and tires. lol
84 2wd 215/75/15 (27.7in tire) 2in lvl front coils. it slightly rubbed without the 2in level

the 93 is stock with 31"s on it, but for it the stock size is 265/75/15. which is basicly the same size. can post pic if wanted but really don't see any reason why.

 

[#1greenranger]

 

[03Shadowbob]

Here is a pic of a 3" BL with 265/75/16s (basically 32"s or 31.9")

spare tire will come off tomorrow.

 

[86ford]

b2 has 33 12.5 15s. the rear INNER fenders have paint rubbed off from the tires but after my friends the hammer and angle grinder were done they dident rub any sharp metal(i beat the inner lip on the rear flat with the inside of the wheel well. the front only has the standard trimming on the lower fender along with the hammer again to bend it so its not a sharp edge. the inner plastic wells still contact the tire significantly even after serious trimming. i would say the lift is around 3 inches (jeep coils and 2.5 inch rancho brackets/radius arms) rear is a bastard leaf pack.

86

 

[LITTLE FOOT]

my 93 ranger aka: LITTLE FOOT
6in lift, 1in front coil spacers, rollin on 35in trxus mud terrians

 

[ak96]

2" bodylift and 1.75" torsion twist /modifed air ride system for about 2" of lift on 31x10.50s

 

[trxusrngr]

1990 Ranger
4" Rough-Country Lift
3" Performance-Accesories Body Lift
33x12.50-R15 TrXus M/t's

 

[dirtsquirt]

http://i375.photobucket.com/albums/oo196/loaderopp/2008_1103Bronco0005.jpg
http://i375.photobucket.com/albums/oo196/loaderopp/2008_1103Bronco0011.jpg

31x10.50 2 inch lift no fender mods no rubbing

 

[dirtsquirt]

3" Body lift, 34x10.50s, minor trimming to front and rear of the front fenders and front of rear fenders.

Hello hahnsb2 I sure like the looks of your B2 what body lift did u use on your truck.

 

[mjonesjr]

1986 Bronco II Eddie Bauer w/ 6" of front lift, 6" of rear lift, and 31x10.50x15 on 15x8's.

1997 Ranger w/ 6" suspension lift and 3" body lift, 35x12.50x15 tires on 15x10 wheels.

 

[Green Mazda]

Ok here is my 1999 b3000, with three inch body lift and torsion cranked about 1.5''. it came with the 4x4 rear block leaf spring spacer thing. These are 36'' tires (Q78-15) rougly about 10.5'' wide, very old tires mid 70's when they were made. No rubbing issues at all full turn and full flex, granit my truck rides very rough (hard suspension). No trimming needed. I love them except for the whole bias-ply unable to be balanced part.

Hope this helps!