ok just call me dumb

[riverviewcontracting]

[FONT=Arial, Helvetica, adobe-helvetica, Arial Narrow]my question is which one is the 35
[/FONT]
[FONT=Arial, Helvetica, adobe-helvetica, Arial Narrow]
[/FONT]
[FONT=Arial, Helvetica, adobe-helvetica, Arial Narrow]
[/FONT]
[FONT=Arial, Helvetica, adobe-helvetica, Arial Narrow]
[/FONT]
[FONT=Arial, Helvetica, adobe-helvetica, Arial Narrow]Spindle Comparisons:[/FONT]

Here's a picture of a Dana 28 and Dana 35 spindle with dimensions shown.

​

 

[Sasquatch_Ryda]

Ok, ur dumb....

(Sorry, had to)

I believe the D35 spindle is on the left, D28 on the right.

 

[frankserrano]

Ok, ur dumb....

(Sorry, had to)

I believe the D35 spindle is on the left, D28 on the right.

i second that...both statements

 

[merace19]

I dont know. Not so dumb. The way the wording of the sentence would indicate 28 on left and 35 on right. Seeing as we here read from left to right. I dont know the answer to question, just pointing out why he and I would think other way around.

 

[BeefStew42791]

What it comes down to is the d35 is obviously gonna be stronger and beefier then the 28 right? Well the larger one (1-3/4") is the one that'd be for the d35, and the smaller one (1-5/8") is what would be for the d28.

 

[merace19]

You know what I could assume that. But sometimes assuming comes back and bites me in the ass. Plus in our English language we list things from left to right. If in Japan then right to left.

 

[frankserrano]

You know what I could assume that. But sometimes assuming comes back and bites me in the ass. Plus in our English language we list things from left to right. If in Japan then right to left.

we don't live in japan..

 

[riverviewcontracting]

What it comes down to is the d35 is obviously gonna be stronger and beefier then the 28 right? Well the larger one (1-3/4") is the one that'd be for the d35, and the smaller one (1-5/8") is what would be for the d28.

see i thought the same thing but than i thought maybe they milled it down to use bigger stronger bearings does any body know for sure

 

[BlackBII]

The bigger one (on the left) is the Dana 35.

 

[merace19]

we don't live in japan..

well NS then why is the picture backward from the wording?

 

[frankserrano]

well NS then why is the picture backward from the wording?

uhm...because.. ! 35 is bigger and better and should therefore be shown FIRST! 28, not so good, therefore second place

 

[BeaterMan]

larger one is for d35.

and in japan don't they read up to down?

 

[merace19]

Well the MODS need to fix the Tech library so to cut confusion. Take whole 2 seconds to switch the numbers around.
http://www.therangerstation.com/tech_library/4wd_Front_Axles.html

 

[kris97ranger]

in japan i thought they read from the bottom of the page up. and from right to left so completly oppisite to us
________
AlphaGod

 

[riverviewcontracting]

Well the MODS need to fix the Tech library so to cut confusion. Take whole 2 seconds to switch the numbers around.
http://www.therangerstation.com/tech_library/4wd_Front_Axles.html

or at least label one of them