- Joined
- Feb 2, 2010
- Messages
- 3,059
- Reaction score
- 37
- Points
- 0
- Location
- Medford, Oregon.
- Vehicle Year
- 1996
- Make / Model
- Ford
- Engine Size
- 3.0
- Transmission
- Manual
It's an 86' F350 Dana 60 front sterling 10.25 rear, 429/np435/np208(?)
Plans
Full hydro steering with single ended ram from trail gear
Chevy 63's in boarded rear
trail gear rear spring out front in boarded (maybe) and push the front forward as far as possible
Push the rear forward as far as possible with out hitting the cab
fully caged, boat sided (probably) tube bed, cut the crap out of the front fenders, maybe dove nose.
welded rear, not sure about the front open for now
eventually re-build the engine, set it up on propane, build a doubler ect.
Plans
Full hydro steering with single ended ram from trail gear
Chevy 63's in boarded rear
trail gear rear spring out front in boarded (maybe) and push the front forward as far as possible
Push the rear forward as far as possible with out hitting the cab
fully caged, boat sided (probably) tube bed, cut the crap out of the front fenders, maybe dove nose.
welded rear, not sure about the front open for now
eventually re-build the engine, set it up on propane, build a doubler ect.