Rick D.
New Member
- Joined
- Mar 26, 2020
- Messages
- 5
- Reaction score
- 0
- Points
- 1
- Location
- Pensacola Florida
- Vehicle Year
- 1996
- Make / Model
- Ford Ranger
- Transmission
- Manual
i'm working on a 96 ranger 2.3 Liter with a 5 speed manual. i don't have any spark coming from the front coil, and i have done a lot of work to it in the last 2 weeks, i have replaced the timing belt the air idle solenoid, throttle control sensor, both coils, PCM has been changed twice. new plugs and wires, new gaskets on the intake manifold ,water pump and thermostat. i checked the the wire connectors on the coils and the front coil has 12v power to the center of the plug but the outer wire is not pulsing, i have been taking all the wire loom off looking for a short or broken wire but i have found nothing so far. Please help or anything i should be checking next would be a great help. thanks CEL is on and its throwing the codes P0351,P0352
Last edited: