- Joined
- Jan 28, 2012
- Messages
- 84
- Reaction score
- 0
- Points
- 0
- Vehicle Year
- 1991
- Make / Model
- Ford
- Transmission
- Manual
Hey all,
So my trusty Ranger is confusing me.
I noticed in the past few days that I do not have brake lights when pressing on the pedal. Troubleshooting steps I have done are as follows:
Replace brake switch.
Replace both bulbs on each side.
If you put hazards on, they flash.
If tail lights are on and hazards are on, STILL flash.
I'm pretty lost here. I even tried checking with the truck running to see if I needed to press harder on the pedal, but nothing happened still.
Tl;dr:
Have power to rears.
Hazards will flash stoplights.
Brake pedal doesn't. Replaced switch. Still doesn't.
So my trusty Ranger is confusing me.
I noticed in the past few days that I do not have brake lights when pressing on the pedal. Troubleshooting steps I have done are as follows:
Replace brake switch.
Replace both bulbs on each side.
If you put hazards on, they flash.
If tail lights are on and hazards are on, STILL flash.
I'm pretty lost here. I even tried checking with the truck running to see if I needed to press harder on the pedal, but nothing happened still.
Tl;dr:
Have power to rears.
Hazards will flash stoplights.
Brake pedal doesn't. Replaced switch. Still doesn't.