akmade65
New Member
- Joined
- Jan 16, 2016
- Messages
- 9
- Reaction score
- 2
- Points
- 3
- Vehicle Year
- 1996
- Make / Model
- Ranger Splash
- Engine Size
- 3.8 SC
- Transmission
- Automatic
- 2WD / 4WD
- 2WD
Hi I bought a 85 B2 in pieces and have rebuilt the 2.8 and have gotten back together. After only about 10 min it started blowing antifreeze out the tail pipe. I hoped it was leftover in the exhaust but after 30 min its still doing it. This is my first 2.8 and did not get to take it apart so I could be missing something. block and heads were surfaced for good sealing, heads were pressure checked. engine runs real good otherwise. Has anyone had trouble with the intake gaskets not sealing? Thanx for any help Tim