Welcome Visitor! Please take a few seconds and deadatmind
New Member
- Joined
- Sep 13, 2010
- Messages
- 17
- Reaction score
- 0
- Points
- 0
- Vehicle Year
- 1985
- Make / Model
- Ford
- Transmission
- Manual
Donor vehicle: 92 Ford Exploder, 4.0, Automatic everything, Push Button 4x4
The Patient: 85 Ford Bronco II, 2.8L carbed, 4spd w/OD, manual everything.
Am I going to buy a new clutch? And if my understanding is correct, I have the M50D-R1 transmission, right? So it should bolt right up eh?
Also, can I manipulate/trim the Ex fuel lines to work on My B2 or am I going to need to get some fuel lines off a 2.9l B2 at the auto wrecker?
One more thing, where is the transcode? On the trans or in the VIN?
I have more questions on wiring, but I'll see if anyone wants to answer these first.
Thanks for reading
The Patient: 85 Ford Bronco II, 2.8L carbed, 4spd w/OD, manual everything.
Am I going to buy a new clutch? And if my understanding is correct, I have the M50D-R1 transmission, right? So it should bolt right up eh?
Also, can I manipulate/trim the Ex fuel lines to work on My B2 or am I going to need to get some fuel lines off a 2.9l B2 at the auto wrecker?
One more thing, where is the transcode? On the trans or in the VIN?
I have more questions on wiring, but I'll see if anyone wants to answer these first.
Thanks for reading
