EdGe_wannabe
New Member
- Joined
- Sep 12, 2007
- Messages
- 22
- Reaction score
- 0
- Points
- 0
- Vehicle Year
- 2001
- Make / Model
- Mazda
- Transmission
- Automatic
Hey everyone, I'm about to be starting a new project soon & I have a few questions. I would really appreciate it if y'all can point me in the right direction...
I'm going to be buying a 1990 Ranger, single cab, 2wd, short bed...
Plans are to swap in a 351 out of a 1979 Ford Van, bolting up a c4 behind it.
It'll be bored/stroked to a 418 or maybe a 393 (I'm not completely 100% sure yet). I'd like to have some suggestions for a cam/heads/carb/anything else that would get me on the right track. I've been seeing issues with steering and header problems, but I'll try my best to work around that. I will NOT be having A/C in the truck, so if that makes any difference; great!
My goal is to be anywhere from 400-500 hp without forced induction or nitrous.
Any help would be greatly appreciated!
Brenton
I'm going to be buying a 1990 Ranger, single cab, 2wd, short bed...
Plans are to swap in a 351 out of a 1979 Ford Van, bolting up a c4 behind it.
It'll be bored/stroked to a 418 or maybe a 393 (I'm not completely 100% sure yet). I'd like to have some suggestions for a cam/heads/carb/anything else that would get me on the right track. I've been seeing issues with steering and header problems, but I'll try my best to work around that. I will NOT be having A/C in the truck, so if that makes any difference; great!
My goal is to be anywhere from 400-500 hp without forced induction or nitrous.
Any help would be greatly appreciated!
Brenton
Last edited: