• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

Need serious help..


mtnrgr

Well-Known Member
Joined
Aug 8, 2007
Messages
542
Reaction score
719
Points
93
Location
California
Vehicle Year
1994
Make / Model
Ford
Engine Size
3.0
Transmission
Manual
2WD / 4WD
2WD
Total Lift
6" Skyjacker, with 1.5" coil spacers, custom radius arms, custom traction bars
Tire Size
31x10.50
My credo
Lord God is my guardian
Once again transmission fluid is coming up the speedo cable housing and leaking onto the dash, pedals, floormat, etc. This issue was originally in 2014. After a whole year a shop found it had mercon 5. They removed and put in mercon 3, and problem solved. Fast forward thousand of miles, and years later. This started 1 1/2 weeks ago. Some of you may remember that I had my transmission rebuilt Sept of 2018, and it has been good. This started after I changed the vss. Wanted to use Ford, nobody had it in stock. I went with a dorman from the auto part store, and that is when it started. After a few days of driving noticed this B.S. again. Over the past week, and alot of research yet again. I found some culprits of other online. I changed the speedo cable, changed the fluid mercon 3 again, changed the vss with a ford part, and no fix..yet. Have been talking with some in the industry, and they are baffled. All I have done it should not be doing this. Still seeking assistance from those I know. Need help as my truck is my only vehicle at the moment. Anybody have any ideas to wtf is going.
 


fastpakr

Forum Staff Member
TRS Event Staff
TRS Forum Moderator
Supporting Member
Article Contributor
U.S. Military - Veteran
V8 Engine Swap
TRS 20th Anniversary
TRS Event Participant
Joined
Aug 6, 2007
Messages
7,991
Reaction score
2,794
Points
113
Location
Roanoke, VA
Vehicle Year
1999
Make / Model
Ford
Engine Type
V8
Engine Size
5.0
Transmission
Automatic
2WD / 4WD
4WD
Tire Size
285/75-16
Do you have a clogged transmission vent tube?
 

snoranger

Professional money waster
TRS Event Staff
TRS Forum Moderator
Supporting Member
Article Contributor
RBV's on Boost
ASE Certified Tech
VAGABOND
TRS Event Participant
GMRS Radio License
Joined
Nov 25, 2007
Messages
13,055
Reaction score
13,529
Points
113
Location
Jackson, NJ
Vehicle Year
'79,'94,'02,'23
Make / Model
All Fords
Engine Type
2.3 EcoBoost
Transmission
Automatic
2WD / 4WD
4WD
My credo
I didn't ask for your life story, just answer the question!
Did you check the vent tube? Make sure it's not clogged. That could cause pressure to push fluid up the speedo cable.
 

mtnrgr

Well-Known Member
Joined
Aug 8, 2007
Messages
542
Reaction score
719
Points
93
Location
California
Vehicle Year
1994
Make / Model
Ford
Engine Size
3.0
Transmission
Manual
2WD / 4WD
2WD
Total Lift
6" Skyjacker, with 1.5" coil spacers, custom radius arms, custom traction bars
Tire Size
31x10.50
My credo
Lord God is my guardian
Don't recall if the 5spd trans has a vent tube. If it does where will be located?
 

fastpakr

Forum Staff Member
TRS Event Staff
TRS Forum Moderator
Supporting Member
Article Contributor
U.S. Military - Veteran
V8 Engine Swap
TRS 20th Anniversary
TRS Event Participant
Joined
Aug 6, 2007
Messages
7,991
Reaction score
2,794
Points
113
Location
Roanoke, VA
Vehicle Year
1999
Make / Model
Ford
Engine Type
V8
Engine Size
5.0
Transmission
Automatic
2WD / 4WD
4WD
Tire Size
285/75-16
Sorry, I missed that it was a manual the first time through. I can't remember about a vent tube on the Mazda trans, but I -think- it goes through the shifter. Do you still have the factory rubber shift rail plugs? Also - any chance you're running a Hurst shifter?
 
Last edited:

mtnrgr

Well-Known Member
Joined
Aug 8, 2007
Messages
542
Reaction score
719
Points
93
Location
California
Vehicle Year
1994
Make / Model
Ford
Engine Size
3.0
Transmission
Manual
2WD / 4WD
2WD
Total Lift
6" Skyjacker, with 1.5" coil spacers, custom radius arms, custom traction bars
Tire Size
31x10.50
My credo
Lord God is my guardian
Are you referring to those 3 rubber plugs that are prone to leak? No rubber plugs, those were replace years ago with those steel plugs or whatever they are made from. Not running a hurst shifter, good ole standard oem shifter.
 

fastpakr

Forum Staff Member
TRS Event Staff
TRS Forum Moderator
Supporting Member
Article Contributor
U.S. Military - Veteran
V8 Engine Swap
TRS 20th Anniversary
TRS Event Participant
Joined
Aug 6, 2007
Messages
7,991
Reaction score
2,794
Points
113
Location
Roanoke, VA
Vehicle Year
1999
Make / Model
Ford
Engine Type
V8
Engine Size
5.0
Transmission
Automatic
2WD / 4WD
4WD
Tire Size
285/75-16
Yes, those plugs. They would give you a secondary venting spot if the vent through the shifter was clogged. I'd do a little digging online to get specifics on how the Mazda shifter is designed to vent, then look at yours carefully. It certainly sounds like it's clogged, and the metal plugs you have in place are forcing the built up pressure to go anywhere it can.
 

snoranger

Professional money waster
TRS Event Staff
TRS Forum Moderator
Supporting Member
Article Contributor
RBV's on Boost
ASE Certified Tech
VAGABOND
TRS Event Participant
GMRS Radio License
Joined
Nov 25, 2007
Messages
13,055
Reaction score
13,529
Points
113
Location
Jackson, NJ
Vehicle Year
'79,'94,'02,'23
Make / Model
All Fords
Engine Type
2.3 EcoBoost
Transmission
Automatic
2WD / 4WD
4WD
My credo
I didn't ask for your life story, just answer the question!
Yup, the vent is in the shifter on the m5
 

mtnrgr

Well-Known Member
Joined
Aug 8, 2007
Messages
542
Reaction score
719
Points
93
Location
California
Vehicle Year
1994
Make / Model
Ford
Engine Size
3.0
Transmission
Manual
2WD / 4WD
2WD
Total Lift
6" Skyjacker, with 1.5" coil spacers, custom radius arms, custom traction bars
Tire Size
31x10.50
My credo
Lord God is my guardian
What will I be looking for on the shifter for the vent? Why all of a sudden would it start doing this after the vss was changed?
 

Bill

Well-Known Member
Joined
Aug 6, 2007
Messages
1,046
Reaction score
865
Points
113
Location
Sacramento, CA
Vehicle Year
2007
Make / Model
Ford Ranger
Engine Type
2.3 (4 Cylinder)
Transmission
Manual
2WD / 4WD
2WD
There's nothing to look for. The shifter just really isn't sealed. My guess is there is a seal (o-ring) or bushing at the speedometer gear that prevents transmission fluid from entering the cable.
 

mtnrgr

Well-Known Member
Joined
Aug 8, 2007
Messages
542
Reaction score
719
Points
93
Location
California
Vehicle Year
1994
Make / Model
Ford
Engine Size
3.0
Transmission
Manual
2WD / 4WD
2WD
Total Lift
6" Skyjacker, with 1.5" coil spacers, custom radius arms, custom traction bars
Tire Size
31x10.50
My credo
Lord God is my guardian
Getting another vss from Ford today. The one I got earlier has the plastic insert where the cable goes. Come to realize that this for the electronic speedo, not the mechanical. Removed the insert, and no change, two of my friends who are trans mechanics at Ford said get the right vss as the two are built different inside. I am getting the correct one for a mechanical speedo. Need to change the shifter bushings any way as they are starting to leak. When I have this apart. Some say to look for a clogged vent and your saying not to look. How do I approach this? I am getting tired from taking this truck apart...can't do it anymore.
 

Shran

Junk Collector
TRS Forum Moderator
Supporting Member
Article Contributor
V8 Engine Swap
Solid Axle Swap
Joined
Mar 4, 2008
Messages
8,637
Reaction score
4,704
Points
113
Location
Rapid City SD
Engine Type
V8
Engine Size
5.0
They are indeed vented through the shifter if you've got the freeze plugs installed. The shifter seal has a big rubber piece in the middle - I'd be tempted to drill a small hole through the rubber. That should let it vent. I agree with everyone else who says it's blowing fluid through the cable - though that is very weird. I don't think they're sealed down there, or at least not very well... every time I pull a speedo cable out of a VSS, a bunch of fluid drips out.
 

mtnrgr

Well-Known Member
Joined
Aug 8, 2007
Messages
542
Reaction score
719
Points
93
Location
California
Vehicle Year
1994
Make / Model
Ford
Engine Size
3.0
Transmission
Manual
2WD / 4WD
2WD
Total Lift
6" Skyjacker, with 1.5" coil spacers, custom radius arms, custom traction bars
Tire Size
31x10.50
My credo
Lord God is my guardian
Problem solved....Bought the correct vss from Ford. Bought a good used speedo cable and housing from my friend's junkyard. Installed all late last week, and have driven 500 miles on all kinds of terrain. All is dry...Thanks to though that helped...
 

Sponsored Ad


Sponsored Ad

Staff online

Members online

Today's birthdays

Member & Vendor Upgrades

For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.

Truck of The Month


Kirby N.
March Truck of The Month

Recently Featured

Want to see your truck here? Share your photos and details in the forum.

Follow TRS On Instagram

TRS Events

25th Anniversary Sponsors

Check Out The TRS Store


Sponsored Ad


Sponsored Ad

Sponsored Ad


Amazon Deals

Top