- Joined
- May 14, 2018
- Messages
- 1,779
- Reaction score
- 1,085
- Points
- 113
- Location
- Western Mass.
- Vehicle Year
- 1994
- Make / Model
- Ford/Ranger XLT
- Engine Type
- 3.0 V6
- Transmission
- Manual
- 2WD / 4WD
- 2WD
- Tire Size
- 225/70/R15
- My credo
- If it's not broken Don't Fix It!
I am in the middle of changing the ECU temp sensor because of a hard start when warm issue. My problem is When I ordered the sensor on line from Rockauto.com I made sure the sensor I ordered was the one that had the round connector and not the squared one but I got the squared one, with the adapter with it, part number is correct but the pic was wrong, and now don't know which wires to connect to. The new pig tale just has both white wires and the original has a red and green wire.
Does it matter which wires I splice to or is it specific?
Does it matter which wires I splice to or is it specific?